RAM memory problems

You already have it installed, you need to update it! Internet to help you there you will find out how and where it is updated and installed to explain this rather long occupation, it is better to see it with your own eyes using youtube.
If a computer under warranty can be delivered to the SC, they can also help with this, or for an additional payment in any SC

Have you tried different slots for RAM? If not, try to change it, if it works, then this is a sad bell.

1.different frequency on the boards of the operative (if there are two)
2. one could be covered (if two)
3. it is not necessary to update the BIOS, especially by yourself))) there

was a similar garbage, there was 8 (2 * 4), I saw 3
friends - master, climbed in the settings,
in the BIOS
just removed the restriction of
no flashing

If you are going to poke memory, do not forget to put the two-channel mode! To do this, you just need to put the memory in the correct slots.

HeroMM
may not have a slot connected, or nae *** operative,
or just clean the contacts on the operative with an eraser

I had this when I bought the 3rd bar for 4 gig, the system showed that the volume was 12, and 8 was available. the new bar was different from the other two, the whole problem was that the frequency was auto in the BIOS, set it manually - it all worked.

dimasukhinin1978 Updated
BIOS and now Windows does not load itself

Pal Petrovich
What the fuck are you talking about? I completely updated my computer and reinstalling Windows was not needed! Don't confuse people.

How many operatives do you have physically worth 6 or 8?

There is such a problem, I updated the BIOS manually, but now the Windows itself does not load, I can only go into the BIOS or restart the PC, what should I do?

go to the BIOS, perform the default settings, set the boot from CD-ROM, insert the Windows disk to restore the system, and possibly to reinstall it

dimasukhinin1978
How ??? If that motherboard from Gigabyte

dimasukhinin1978 No
disc

dimasukhinin1978
They are there already by default !!
In vain, of course, I got into the bios.
now you have to look at what is in Bios.
Maybe the memory voltage is the default, maybe something else

mother what model?

Danila Mavrin
Mother card model please tell me

Ryazancev
Loads Windows to a black screen with the analysis of devices as I understand it

Mother from gigabytes

Danila Mavrin
What manipulations with the bios did you do before, that after all this appears?

Download from a torrent, take from a neighbor, etc.