Tell me about r9 290
Good day! I want to buy r9 290 but I don't know if the computer will pull? if not, what needs to be changed and preferably where to buy it is not expensive, can anyone know !? I will install the power supply either 850 or 1000W, but I don’t know what to do with the mother and the process :( PS maybe someone knows where and the video is not expensive, you can even take a little bit.
I have such a suspicion that the processor is slightly weak.
I will put the power supply unit either 850 or 1000W
will you stuff three r9 290 there?
maybe someone knows where and the video is not expensive, you can even take a little poyuzanuyu.
Avito?
And why a PSU from 850 watts? Enough 600-750
Yes, and for 290 your processor will not have enough power. You need a more powerful processor.
Simply, if you leave this processor and 290, then your processor will not be able to open the card.
You can put it, and for this particular computer, 600W will probably be more than enough.
Another question is that some games will slow down due to the processor.
and in any case, such pitch is not very long, so 1000 vantik can be taken with a margin for future pitch.
MunchkiN 616
so I thought. right now it costs 450W power supply, it makes sense to take a little more chp in the future to break off again because of it, it’s better to take a normal one! with a margin. tell me which mother is better to take and percent right now mother GIGABYTE GA-A55M-DS2 RAM I think right now should be enough for the first time.
it is only desirable from a more budgetary one, but so that in a year again do not change! This happens?
Alexander Kabov
with a margin, this concept is extensible for the volume of the wallet and the requirements for extensibility of the computer.
in theory, now the minimum gaming computer is amd fx 8xxx 4 GHz and a motherboard for it.
for the motherboard, respectively - for overclocking, for several video cards, etc.
290 in this case, a rather mediocre card - it depends on what settings and resolution the pitch claims. if at the maximum, then it is only in a pair of 290.
and so it is believed that fx and 290 are a completely balanced assembly. and in the future, it will most likely be possible to load an average card or two on it.
the question is too vague.
Alexander Kabov
AMD FX-8300, motherboard for overclocking, 8 GB of RAM and 290x, 600W bp and you're done.
What is the best mother to take? not a lot of money, but g ... not willing to take. percent normal? I'm just not kidding
By the way, everything is also said about the 290s, only overpayments are more
If I were you, I would take r9 285 instead of 290 architecture fresh full support for 12 direct and cheaper by 2 times
Has anyone come across c hd 7990? and 690.
It seems to me that p9 285 will be many times weaker here on another forum, they just advise considering 7990 instead of p9 290 at a price they are similar, but 7990 has two cores and 2g more RAM. even about 690 they say I'm not special, so I look at all this as symbols of some kind))) explain what for what and what is all the same better. tell me which mother to take? with a percentage, as I understand it, everyone agrees AMD FX-8300 or are there more productive counterparts?
Alexander Kabov
r9 290 is better, 8320 or 8350 percent (the only difference is in the stock frequency)
Alexander Kabov
Well, mine has 690. To say that it is powerful by modern standards - I would not say. something closer to 960-970. plus ultra it does not pull due to lack of memory.
for 2 chip cards, the memory is not summed up. therefore, in 7990, roughly speaking, 2 7970 and in 690 - 2 680.
and it is absolutely not worth buying cards with less than 4 gigs per chip.
regarding the processor - if there is no desire to overclock it, it is better to take 8350 mk, the minimum comfortable performance is only for it and for higher models.
Alexander Kabov
it all depends on the amount you are willing to spend on the motherboard
damn well, I don’t know in the region of 5-7 there are normal ones? Or is more better?
http://cpuboss.com/cpus/AMD-Phenom-X3-8450-vs-AMD-FX-8350
By the way, the link is cool, but the price difference is cool at times, why is that?
Profile config, CPU: AMD FX(tm) - 8350 Eight-Core Processor x8 4.00 GHz | RAM: 8GB 1600mhz| GMA: R9 290X DirectCU II OC (R9290X-DC2OC-4GD5) | Motherboard: ASUS M5A99X EVO R2.0 Socket AM3+ | OS: Windows 7 SP1 64-bit build 7601|. I assembled it myself, a block for 700. Mother with a margin, solid-state transistors. You won't find better.