Video card is heating (Red Dead Redemption 2)

MrFox22
Turn on the vertical, if the used card can be blown through, change the thermal paste and gaskets, stick a couple of three coolers into the case if they are not there, well, 83 degrees is not a critical temperature, from the standard methods, in principle, everything.

MrFox22
If I bought it from my hands, then everything can be. The card should pull, but it heats up so it's normal.
Turn down the settings so it doesn't overheat.

And for the sake of one game, I think it’s not worth doing complex replacement operations. Since the hands are kind of straight, but who knows what could happen.

Wow. I have above 71 in RDR2 it does not heat up at 50% cooler spinup. And this despite the fact that I changed the thermal paste a year and a half or two years ago and haven’t cleaned it for a long time. If you clean it, you can even make it a couple of degrees lower.
You really need to blow through and at least change the thermal paste (it's not difficult and you can do everything yourself).
And it is quite likely that the root of the problem is also purge-cooling inside the case. It needs to be improved.

Seifer1986 wrote:
Wow. I have above 71 in RDR2 it does not heat up at 50% cooler spinup.
mine is 58-59 degrees. No more than other games. Downvolt still needs to be checked, there it would still be thrown off.

MrFox22 wrote:
but for some reason it heats up for me, it reaches 83 degrees
1. The card is down-volted to 850-950 millivolts.
2. Open the case - check. I have no idea what "other games" you have. My temperature is no different.
3. Edit the curve in the afterburner - by fans.

You can limit the frame rate (in the system settings), for example, set it to 30. I have 1650 4 gigs enough for medium settings, with a lock of 30 fps and 65-75 degrees. If without a lock 2k 60 fps immediately 82-83 at the minimum settings.

Tisdare
On the rtx 3060ti, set the lock to 30 fps, somewhere on the forums I came across a similar topic, the whole problem was in the gaskets, after I changed the temperature dropped by 20 degrees, well, maybe the problem is not in them

MrFox22
Such powerful cards should be taken with only three fans.

Max P
don't make people laugh here. Open the map and evaluate the cooling system, the number of heat pipes and the platform for the core .. And there is nothing to take deshman cooling. There is nothing powerful in the 3060 Ti, not even GDDR6X. There are two screws, temperatures within 60 degrees. There is a downvolting and even a redistribution of factory coolers for case coolers along with the removal of the casing, which is also a problem in cooling.

And yet, he has obvious problems with the ventilation of the case, because according to reviews it seems normal 73 maximum.

MrFox22
Change to a normal case, with a 140x140 fan for blowing in and 140x140 for blowing out, at least corsar.

be quiet - very decent cases and quiet and blow through well.

MrFox22
had a similar problem, I just set the dlss quality in the game and it became less warm (from 80 dropped to 70 gr)

MrFox22
put dropsy