Help problem with RTX 2070 (Assassin's Creed: Odyssey)
I have a I5 processor 6600K overclocking 4.6I played the 980TI and it was all good. The map was loaded to 99-98%. Today I bought the RTX 2070 and found that the card is not loaded and the processor is at 100% almost always. Is the processor can load or is there some nuances? Can someone experienced help pliz...
Of course not loading. Graphics of this level needs a processor of the same level!
A proof on these things miracles? What 6600к and monitoring of frequencies of CPU, RAM, and graphics card.
Xenol
Yes, just change your 6600к on 6700К,and if the motherboard on Z170/Z270 - you should raise the memory frequency up to 3000-3600МГц(this will give a greater increase in fps than the stupid acceleration of a percent)
PS Sam sitting on 4790к(stock)+1080Ти+DDR3 2400 - fps in the new levels.In the same as the Odyssey on Ultra /2560x1440 - 85-120фпс.
Or do I urgently nonin 8700к for the mega-fps ?(do not tell my socks)
P. p. S. Forget about this syndrome disclosure. 100% load may make inappropriate settings very easily.Even on the i5.
Леший_70
The fact that the process peregruzhatelja and video card idle at 60-70% load. If there is manipulation which will help to load the map and remove load from my rock, I listen to tebanicline. Help if you can.
PS system
i5 4.6 ghz 6600k
16gb ddr4 2133mhz
Z170a Msi sli plus ( up to 980ti sat on the sly)
Asus Rog strix 2070 rtx
Inwin commander III 800w PSU
Xenol
Percent constantly at 100% in assassin, because it does not pull, protsessorostroeniya reduce graphics settings or buy new ones. Video card and you will not have to constantly operate at full capacity because reserve capacity, it is enough to pull max settings of the game and not overexert.
If you so fundamentally to torment the unfortunate, then turn off vertical sync, the card will always be 100%. Have to say that your knowledge in hardware is very scarce, so either deal, or buy the console, just in time for people to do.
Xenol
if you build a computer starting from Odisei there will be a price in 300K ,optimization of the game slag ,why did you changed the 980 ti is also not clear .
but if you want it in assassins 60+,as above and wrote get i7 in your socket and all pull
Леший_70
I would love to see Proff where you and your confocal on ultra at 2K have 85-120 fps
kot942011
I just never cease to amaze the people who are outright nonsense with a straight face and not a bit blush.
Xenol
Now we need at least 8 threads on r 5 1500x game goes well and reserve the CPU usage is still there.
Spoiler
tell me then and I own a Gtx 1060 6gb, I5 7400, 8gb.
Play 2K (below the jump and not going to). There are files of MSI AFTERBURNER is someone using it? That can be set to increase FPS and what gains can you get?
-MODEUZ-
to lower the settings?
MSI AFTERBURNER - monitor system, the overclocking, setting up coolers, etc. But judging that you are asking a question better not go
Metalist1925 wrote:
But judging that you are asking a question better not go
But why am I asking this question? Or just you want clever? Like normal I asked what to put and what result you can get!
SPR1GGAN wrote:
I think your iron is not for 2K gaming
Now I'm not particularly satisfied with Assassin Odissey (mid-high settings 30-45 Fps, I would like more).
All other games are safely in 4K (with different settings)
-MODEUZ-
-MODEUZ wrote:
All other games are safely in 4K (with different settings)
Wow 1060-I and 4K??? here 2080ти not pulling 4K and it turns out there is a way this 1060-I))), and anything that it is 3 times weaker 2080ти, most importantly for some unknown reason pulls 4K.