The speed of copying and reading has fallen by 2 times, what to do?!!!
Hi there - such a disaster has happenedDo regularly test the cache and memory and now find such figures
The modules are like, and encourages ADR in slots a2* and b2*!
What we found out:
Leave one bar in slot b2 - all the rules
Put this same bar in slot a2 - indicators of reduced!
Have to put in slot a1 or b1 comp starts after 3-instant reboots - and immediately passes out!
2-3 months ago all was okay
BIOS dumped
And he manually tried
Strap seats changed
Nothing helps
All that wine? help
Processor - AMD Ryzen 5 2600 OEM
RAM - CORSAIR Vengeance Pro RGB CMW16GX4M2C3000C15 DDR4 - 3000Mhz 2x 8Gb
Motherboard - Asus Tuf B450-Pro Gaming
BP - beQuite System Power 600w 9
Graphics card - Gigabyte G1 GTX 1070
Windows 10 Pro 65bit on NVMe - SSD drive A-DATA XPG SX8200 Pro ASX8200PNP-256GT-C 256GB, M. 2 2280 PCI-E x4.
vatakatov58
90% that die under the RAM slots then the problem is with motherboard
vatakatov58
It was necessary to do this for a long time, there is no need to ask you, they will advise you .... PC health is like that of a person. Only the doctor will say. And to go to him or not is already your business, but they usually say this - DO NOT TIGHTEN ... The more you blunt, the stronger the consequences will be. Everything can be from the banal, for example, stupid oxidation ... but vsezh.
semferot48
In general, I took a kit from a friend 2 * 8Gb 2400Mhz
Everything works and the speeds are normal with a speed of 40,000+.
What is the problem? Maya ram is not compatible with my motherboard?
And my plans for him also work fine without loss.
vatakatov58
Most likely the mother crookedly trains sub timings, it is necessary to edit the pens.
Taiphoon burner and Ryzen timing calculator to help.
legusor
legusor wrote: I
advise you to buy hardware on a normal intel platform.
Yeah, there are no such problems on the Intol.
Thanks for your stories.
I did not immediately notice that the dual does not work for the neby, this is no longer the case in the BIOS. Something has come up. You do not have a two-channel memory mode, and therefore the speed is not summed up.
If it was a matter of timings, it would be like this:
The speed drops due to the BIOS settings, but he still sees the dual.
Lex-one
Well what I want to say. I did everything according to the guide from PulsePC.
I entered everything using the Dram calculator, set it to 3400. I entered the
BIOS and entered all the numbers and voila - no drawdown.
Excellent speeds!
The bios curve hike gives me secondary timings incorrectly! but manually everything is ok! Even 3600 takes, but regretted the oz)))
Lex-one
can you help me? the reading speed also dropped, if immediately after launching you run the RAM in the Aida test, then the values ​​are closer to 40GB per second, the next test if you run it immediately drops to 26 GB per second, this immediately affected the performance of the pc
Lex-one,
everything that I found, tried it, does not help, and through the calculator, too, just a blue screen, my dies are different