Nvidia SLI (Resident Evil 7)
Someone the game runs fine in SLI mode?I understand officially there is no support.
Maybe someone found a profile with a stable job?
DrexDelord
To do so.
Forced on SLI (the second card). Go into the NVidia control Panel. Are you searching for line Managing 3D settings (Global settings) , choosing the option"Mode multiprocessor rendering and choose the option to Execute an alternative construction of frame 2 (bottom row). And truncated. You can check in AIDA, temperature sensors cards. Or other monitoring prog.
DrexDelord
Oh, same problem? In short, I found a way, BUT....
So here we go:
- Here is a detailed video how to do it. There's all terribly simple.
There is a second way to accomplish the alternative construction. But in this game, not roll. Sli will be, but performance will drop as much as whether you play 8-10K resolution, just wait for the hard drawdown fps. In short a glitch. Although in Xcom 2 perfectly prokanaet. And so going back to the first method. So there was no bands in the game, turn it off in the Nvidia control panel Fxaa (of course if you have it there is)
DrexDelord
If you're on dierences, it is clear like this. Although utuber swear about it. And sense when setting up to you, that is, from all of us? Personally, I Vovan helped. Using the various elements of the don-graph can achieve not bad results in this way of optimization. And later you can have to disguise everything under a spoiler, if you back up to pitch the facts of the particular photos, al video proof. Why? Personally, I did at random to get rid zabalansovyh the mountain. Specifically when suspending the app.
I have these settings, some are loaded to a maximum of 60% of the artifacts there, but there are freezes even at 50 FPS, if you disable this profile to a single GPU performance got more and freeze there. That would profile somebody threw or settings, so that some normally loaded and the Frisians were not. Have noticed that the game in window mode without frames I looks sharper and higher FPS.
AlexeyT wrote:
I have these settings, some are loaded to a maximum of 60% of the artifacts there, but there are freezes even at 50 FPS, if you disable this profile to a single GPU performance got more and freeze there. That would profile somebody threw or settings, so that some normally loaded and the Frisians were not.
if some nedorogaya maybe not enough power percent, in the video game tests on 5960х in overclocking