Jump frequency and load of the video card
GTX 1060, galloping boot and frequencies when playing Watch Dogs 2 next picture
The drivers are the latest and the mode of High performance in the power supply, not help
CPU - I5 7400
so it may be CPU because this game is very processorsamsung. Try during the game to enable the overlay and see how loaded the CPU and at what temperature. And what pace have a video card at the time of the drawdowns?
About high performance it is necessary to put in the panel of NVIDIA, I sometimes vidyuhi also in some games resets frequency, however met such only in 2 games.
MagicHero
Temperature 65-70 degrees, but the video is reference, and the processor is in the game loaded to 100%, but at the time of the frieze, the download drops to 75-80 percent
And in the Nvidia panel is the Optimal consumption
put in the panel NVIDIA preferred maximum performance" and see whether the productivity decline. And what's the CPU temperature at the time of the Frisians, and that maybe it's because of overheating starts trottling
MagicHero
After put the preferred mode for maximum performance after you download met high frieze 2 and all, and the temperature of the CPU is 58-60 degrees
Nikita Nekhaev
The chances of subsidence of the CPU was loaded to the max? if Yes, download the graphics card crashes due to it. Test CPUs in this game from the well-known website - performance of your CPU approximately at the level of 2500К. But there stood was done in 1080p and maximum quality settings, and you their is not described.
Spoiler
SonyK.
In moments of drawdowns CPU load dropped to 70-80, but the screen settings
MagicHero
8GB + swap file, and I think that probably because of him and frieze
Nikita Nekhaev
Rather what it means for him? screen get download RAM and will see how many eat. If is close to the limit and jumps through it, and the game begins at this time to slow down (or frezite for a few seconds) - resets the data to the paging file, and then get out of it. According to the configuration, you have it is not on a high-speed NVMe SSD (or ramdisk), but at least normal, or even an HDD until the data in the return in the RAM may be the brakes.
SonyK.
It is a regular hard drive WD Blue (WD10EZEX) at 1 TB, but the game has a maximum on how much was occupied RAM, it is about 6.7 GB, but the paging file still was around 14GB, I turned off the paging file, but then the game does not run
Nikita Nekhaev
Although I have a decent (by today's standards) amount of RAM (in profile) on every case turned the paging file. But since under my system SSD (not the greatest), made its dynamic - manually set the size: source = minimum, max = recommended. Constantly is 16 MB, when you need increasing itself, after a reboot returns to the minimum.
Spoiler
WD series Blue used to be considered average (as far as I remember was: green, blue and black) - now is not to know (have a lot of different series to do). In 2010 I bought my WD Black and use it to this day, but now as a long term storage system and games on SSD.
SonyK.
I'm afraid that so much of the paging file is not enough, given that the game is about 13гб
Nikita Nekhaev
Can't say - not yet played, but during all games include Afterburner and glancing at the screen load. I only once was, when the game is ate all the RAM and started to use FP, it is gradually increasing. By the time were done, it was occupied by 16 GB RAM + 9 GB about the OP.
Nikita Nekhaev
Nikita Nekhaev wrote:
8GB + swap file, and I think that probably because of him and frieze
Why not the RAM, not just the symptoms that clogged the RAM is accessing the hard disk and it is still the wild brakes. Bring in an overlay of readings of the RAM and if there will be a value close to 8 gigs of RAM is to blame.
MagicHero
Well I say, yesterday I played about 2 hours, the maximum number of occupied RAM was 6.8 GB somewhere, but the paging file is about 14-15GB