Sipogka
because the computer on the 775 socket under dual cortex A1+A2 B1+B2. in some boards, there may be no in which slots to put in others. in any case, 3 bars of antiviral dual and single slot is a continuation of the first slot in this case and there's nothing either bad memory - as reported by peck. not symmetric modules can work symmetrically only sequentially. plugging in a random order (e.g. 4 modules in one row) as far as I know, civil, computers can not.
Lord,please tell me what is different about the motherboards in marking,between the Z97 and H97?
DartMaul,i.e. if I don't do overclocking,then I can focus on the Z97 version,so as not to overpay?
Norms motherboard?
http://www.ulmart.ru/goods/310771
On Socket 1155 anything decent did not find.
Drive will not.
This is kind of serious.
http://www.polus.su/materinskie-platy/msi/msi-p67a-c45#
Ice Hammer IH-4500 it is perfectly up?
UPD. Lol. At work brought up this.
https://market.yandex.ru/product/7893628?hid=91020
It is much more solid.
who thinks about the AsRock X99 Extreme11
in particular, how she fared with overclocking?
Need help choosing a motherboard for i7 4790k. To disperse but I previously never came across, so much to rape the system unit, squeezing everything out of it, no plans.
In General, the main criterion for Assembly - a maximum performance with maximum silence.
I would like to fit pieces 10.
ItsJustMe
If you want to buy a motherboard for serious overclocking 4790К, absolutely do not have to spend 10K for a show-off, the main thing that needed a Z97 chipset and powerful picolinic 6-8 phases.
For example, you can buy for 7K such oversaw Mat. Board: Gigabyte GA-Z97X-UD3H 8 phases is more than enough for overclocking.
To bring anything more expensive is not reasonable, unless of course You show-off not more money. You can even look for cheaper options on Z97.
Belomorkanal
Look here: http://www.regard.ru/catalog/filter/?id=NjA2NjsyNDMsOTkzNzsyNDUsODY1MTsyNDksMTA3NiwxMDQwNTsyNTAsMTA3ODsyNTcsMTA4OCwxMDg5LDEwOTAsNDA1OTsyNTksMTM0OCwxMzUxOzI2MiwxMDkzOzI2NywxMTE3
In the reviews seen, that there are mothers on this chip bad with acceleration, for example, MSI PC Mate or ASRock Anniversary (the most simple and cheap models). Ideally, of course, the cheaper the better, but again, it's all about my incompetence in the selection.
ItsJustMe
For overclocking get the one that I suggested. Or this variant, also a good mate. fee for 8 phases, I have worked for a year 4770К on MSI Z87-G45 GAMING (the same model, but the Z87), clocked up to 4.6 on the multiplier, had no problems.
You can take and cheaper with the same powerful patalenica of 8 phases like this, but this Mat. Board is not suitable for SLI and CF, as the two graphics cards will work on the scheme х8х4, and to work without loss need x8x8. For a powerful gaming system with one high-end graphics card this Mat. fee well the second set is not profitable. I hope You understand what I mean.
2Беломорканал SLI/cross for 1150 socket is meaningless. It is better to take one high speed card and let it work in x16 mode instead of the processor graphics core.
And z97/z87 is better to put a co-processor for physics (or profile sound card, such who uses).
People!
Such a disaster has happened. On the motherboard Asus P8H61 set CPU Core i3-3210 and the computer ceased to turn on. Rather it turns on for a few seconds and then turns off.
In what could be the problem?
Sergey067
Yes, as you say. Press the power button. The fans start to spin, but after 2-3 sekundy off. In five seconds again start to rotate and after 2-3 seconds turns off. And so until you pull out the cord from the outlet.
I was thinking maybe the version of the BIOS update, and then I have a really old.