Graphics settings and fps (RAGE 2)
The method of testing was found the graphics settings to 35 frames reduces the frame rate.Spoiler
Printer0007
Have installed a new driver 19.5.2 and jerking is completely gone and the fps was even higher.
I have not displayed the fps counter, you need a new version of MSI Afterburner?
Subaru MotorSports
Why afterburner? Whom he now needed? Because everything is already there in Radeon Adrenaline.
Spoiler
From NVIDIA too. In the extreme case of fps monitor.
gennaz
Msi afterbuner - cool stuff! What is there not ponastavili. You can even display info of the cooler, Monica, motherboards, measurement of voltage, figures 1 and 01! Yes!!!! Except I found about the PSU. But it's okay! The important thing is that you can make a very beautiful chart and find almost everything your heart desires) for many years, using this program.
Subaru MotorSports
Well then in the settings application detected level put on high.
Spoiler
Well, the version should be the newest.
gennaz
I need the program MSI Afterburner in the first place, to regulate the speed of the cooler on the graphics card.
Subaru MotorSports
In the old part I got this item when buying a new card. After updated to the latest version, the settings of the cooler appeared again
Has anyone tried to test with the new Nvidia drivers 430.86? Are there any changes in fps, plus, minus? And I do not know whether to upgrade. For example with the previous firewood 430.64 I have Rage 2 began to go smoother and the fps increased slightly, but in Sekiro fps dipped noticeably in comparison with 419.67. Printer0007
gennaz
So what does this comparison in another game and other versions of fire wood and on a different api? I'm interested in comparing fps specifically the Rage 2 and that versions wood 430.64 vs 430.86. As Nvidia often it happens that after an upgrade in some games to get better, but in others the fps starts to sink. In the example I gave Sekiro, there my fps dropped to 40 after the update on 430.64, though before all was normal, 55-60 fps on high. Fortunately I had already passed, and now do not play, otherwise it would have to go back to the old wood. And Rage 2 with the same wood better. Fps have grown by about 5-10 and has become smoother, fewer spikes. Asking because some specifically do such tests, and I would not want to waste time reinstalling the wood for nothing, because for me, every extra fps. I have not once got burned with a new fire wood via NVIDIA one treat, another cripple.
Grandfather Mastday
Found I could is the most recent, that is. The most logical to stay with the wood and finish.
Already wrote in another thread, I copy here the game does not need anything at all. I have a supposedly very old FX4300, ddr3 12 gigs hard and map gtx1060 6. 900p on absolutely everything on ultra, just smoothing without TTA - that there was no soap - no restrictions 85 shots even in the desert (Underground in the Caspian sea on the middle SAG 45). And then had to use force to limit fps (limiter in the game does not plow). In short - the game requirements Duma 2015( or what he was there for years), the graphics by the way the same mediocre...
Ashley33 setup drivers put a checkbox where vertical sync = use the 3D application setting or just turn up
Subaru MotorSports
This is to reduce unnecessary load on the graphics card and avoid discontinuities of the frames. For example, if you have a monitor of 60 Hz or 75 Hz, and none can render more frames per second than the frequency of the monitor, the extra frames you never see, so why would the graphics card to handle them? Moreover, with too high fps (300+), you may receive a nasty whistle in the choke video. Work in this mode decreases the life of the glands. Enabling V-sync solves this problem, but adds input lag (input lag). To avoid input lag, over & under switch off, but turn on the fps limit equal to the frequency of the monitor, for example via nvidiainspector, if it is not provided in the game's settings. Play fps, makes no sense. It only needs to monitor performance.
Grandfather Mastday
I agree. no rifle and only play like battle network. Single initial normal stable 60 fps, though the video card RTX 2060 may be under 100 fps issue.
Grandfather Mastday
I have the video driver selected vertical sync - adaptive, in many games - window with no border, a total of 75 fps, no tearing.