SpeedFan

SpeedFan must die.
Complete garbage.

The sensor that is faulty can not be?

On Temp3 ignore, the program tries to read the temperature with a non-existent sensor so the temp. so different, and Temp1 and Temp2 is the temperature of the North and South of the bridge.HD0-the hard drive Core processor.Hope realized.

Romeo666

Here indicators SpeedFan 4,33

Темп1: 46S (this mother as I understand it)
Темп2: 25C (this is the General rate of Prots)
Темп3 -2S (do not understand what it is only in SpeedFan in other prog in General this pace is not)
Core0: 21C (core 1)
Core1: 21C (core 2)
Core: 65C (core vidyahi)
Ambient: 0C

Ambient what is that indicator on Темп3 not see at all.The processor and video card in overclocking?Темп1 and 2 is the NORTH and SOUTH BRIDGES,not the mother and the overall rate. percent.

Ambient what is that figure
Apparently the temperature of the environment. Just missing the sensor.
Темп1 and 2 is SOUTH and NORTH BRIDGES
This Board doesn't have temperature sensors NB and SB.

Then, the program takes the temperature?

Then, the program takes the temperature?
Good question :)
But in any case, the CPU temperature is not displayed correctly, so I see no sense at all to use Speedfan with CPU Е6х50.

Silent Hill 764
Advice to you is this, use Everest and live in peace.

Romeo666

The Everest of this sensor with the temperature is generally no! So how would he even took it unclear...And you have SpeedFan in Temp3 same nonsense shows?

I happened shown -57градусов,and how he takes it I'm curious to know.And in General hammer on SpeedFan and use Everest, it seems to be more reliable.

Romeo666

Yes use it....why is it so and kept -57? no more no less?)))

I said SOMETIMES,but in General differently.

Hello.I would like to know what the optimal temperature is better to put in Fan Speed (i.e., the desired t and the maximum).Now I have these figures:
System: 39C
CPU: 47C
AUX: 9C
HD0: 35C
Core 0: 38C
Core 1 :39C
Core: 59C
Ambient: 44C

In this case, all fans set to 65%
I would like to know whether it is normal temperature

Temperature display AUX can turn off is prespani sensor. Otherwise it will interfere with irregular pace from -100 to 100 ...

The guys, which I don't understand where to reguleerivate fans, but it turns out my card is properly heated((

prompt temp1 reaches 70 it is normal.if not what should I do?

gmoga What percent? And so not normal. Clean, change thermal grease. And it is better to change reggenie.

did not understand a bit



-
Core GPU and that one value the temperature of the video thing, then why two of them? at the core are two sensor?

I also had a problem...In SpeedFan showed temp3 90 Celsius.Well, it is clear that the heat on the street.And the flow of air my normal in box not secured.Then had a comp to drip...After was not raised so.Now I have these readings:
Speedfan-
temp1 50
temp2 39
temp3 80

Sensors View-
The CPU 53
SYS 50
AUX 39

Who to believe? The Sensor is not such that 75+ was.And it is not clear what this figure...