3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
S
SPR1GGAN 06.04.20 07:38 pm

GTX 760 is cut in a simple

Vidyaha in a simple cut ,that is, when the PC ,if you leave just Desk she pass out and turn on only after restart PC .
In heavy games, not when it falls ,it happens arheydzhe and DotA when verbalise in games on the screen vylazyat artifacts or just a white screen .
The disease was in the old PC was assembled new ,but with the old card ,the problem remained .
The PSU is new ,not the Chinese ,all right .
What can be the problem? BIOS can do that? or that conder or power circuits? maybe just raise the voltage?
13 Comments
Sort by:
R
Ryazancev 06.04.20

SPR1GGAN
Look at the temperature.

S
SPR1GGAN 06.04.20

Ryazancev
50 degrees
temperature would be relevant ,if only she was grajales under load and cut down both races in idle ,which is very strange .

R
Ryazancev 06.04.20

SPR1GGAN
Can the MOSFETs peregrevaetsya. Take it to STS let's see, measure voltage on different elements. A lot of things can fail. He can just make out and visually inspect it will do nothing.

S
SPR1GGAN 06.04.20

Ryazancev
the service is already the final version ,I want to start to get rid of all the options

R
Ryazancev 06.04.20

SPR1GGAN
If overheating of the power components, power circuits or memory (which is unlikely), you can change the pads. In other cases, the repair will not do.
And at 100% fan speed the same problem?

S
SPR1GGAN 06.04.20

Ryazancev
a sense of speed when the temperature is normal

R
Ryazancev 06.04.20

SPR1GGAN
You can only see the temperature of the chip of the GPU, while the remaining elements of the temperature sensors no. For increased speed, video card cools all the elements. A binding fan speed only to the temperature of the GPU.

S
SPR1GGAN 06.04.20

Ryazancev
okay ,but if it would be in the temperature ,then in idle it would fall , and she races off the same in idle and in load lives .

R
Ryazancev 06.04.20

SPR1GGAN
The situation is not standard. It is clear that there is a problem and their very unlikely to find at normal temperatures. If visually all the rules (no darkening of the PCB), then the reason can be found only in the service, and even then not always.

M
MagicHero 06.04.20

SPR1GGAN
You have in the settings electropitanie is the monitor to turn off after 20 minutes? and maybe none with the marriage which causes it to hang if the monitor software is deactivated.

S
SPR1GGAN 06.04.20

MagicHero
there is not the monitor turns off,and the whole system hangs ,if on-the-go card from the motherboard pulled well ,or the power is cut off .

L
Lexx77 06.04.20

SPR1GGAN
And the card manufacturer what? more detail would be all... Again artifacts... Although information little, that's about the PSU all OK, but maybe some additional picolinic vykruchivatsya.

M
MagicHero 06.04.20

SPR1GGAN
And you do is sleep? if Yes then try to disable it.