GTX 1060 6 : GIGS unsubscribe works

Listoman
Why. Raising through a program raises the bar for the minimum naprugi and frequency more stable
didn't notice at all

Vinni-Pukh
We must be attentive)

Listoman
Closer to what? I gave the slider 0,0320 V only. And it is 100%, while the frequency of the same, and overclocking even 5 MHz raise

Vinni-Pukh
So at 5 MHz and it can not happen , because the step 13мгц) If afterburner use, then for each map it is necessary to select your control mode voltage. I like the standard acceleration and frequency stability more than the standard, extended and third party

Hto here fumbling,tell me:i5 4570 reveal this card?

Listoman
well, I was even 13 MHz gives

Guys, as in the graphics card Asus GeForce GTX 1060 STRIX OC 6GB GDDR5 to watch the temperature of the memory? In Aida64 not showing, although GTX 660Ti Aida64 showed the temperature of the memory.

He took the same super powerful version of Gigabyte 1060gtx 6g EXTREME GAMING. Suggest by the way, has a super cooling and the ground under acceleration and just with a good dispersal.

Varlock13, Yes.

Richard
Richard wrote:
He took the same super powerful version of Gigabyte 1060gtx 6g EXTREME GAMING. Suggest by the way, has a super cooling and the ground under acceleration and just with a good dispersal.
Just super what a super awesome card )))

warp 37
Healthy. You like the same as my video card, you do not know how the temperature of the memory can be viewed? Through what prog? Aida64 not showing...

Gufy777, not know, not interested.

Vinni-Pukh
The word Bullshit, which is the way YOU began to apply, I mean the very essence graphics core overclocking. Since More increase gaming performance gives the memory overclocking and not the kernel, voltage which, the relationship to memory has not. Surely if you only need the indicators in the tests and not use - increase FPS in games, then Yes. Can and BIOS flash to get moral satisfaction))) But I need a purely profit and not the numbers in the benchmark.
My clip freely takes and +150Мнц to the core, but makes sense to me in this, if memory even +1300Мнц will not go.

Listoman
If the burner shows the step 13 , it only means that the program curve is visible in gpuz every dobavleni megahertz.

WWQ
And where does Berner? As if you didn't want, but Pascals step 13мгц)

Listoman
I have a 1MHz step , as always, don't know what you invented, and if we assume that the effective memory frequency , the pitch is -8 (at 1080 with gddr5x).

Listoman
WWQ
By the way, Yes. WWQ right, as I am informed, step is 1 MHz, is added to burner 1 MHz, GPU-Z gives shows an increase of 1 MHz.
Djonnikc
Overclocking the memory gives you no more than 3 frames...

Vinni-Pukh
Strange, but here absolutely other results (at the end of pivot charts)
http://fcenter.ru/online/hardarticles/videos/39131-Obzor_i_testirovanie_videokarty_NVIDIA_GeForce_GTX_1060_Founders_Edition_teper_klassom_vyshe
Reference acceleration the reference 1060 is much less than that of graphics cards from other manufacturers. But even in this case, the average increase is 11.9% - 13.7% in 1080p. If you take the average FPS to 60 different games in 1080p, it is at least 7 frames, and the maximum is 8 frames. As if that doesn't sound like your 3 frame.....
And once again, for frequencies 1939/9349Мгц for GPU/memory. And my acceleration, can be seen above)))

Vinni-Pukh
XS, what do you have for Chinese maps, but step on pascal 13 MHz. 2063-2050-2038-2025-2012-2000-1987-1974, etc., the Frequency increases by 13мгц and not less and I'm talking about the kernel

Listoman
you're all about the boost frequency say, but you can change them by pressing ctrl-f I think in afterburner, can't remember exactly.