Vidyuhi and power supply.
Can someone help. there are none and there should be 3, 8 pin , it is possible to connect to such a vidyuhi or not, the power unit Chieftec APS-750C 750WThe line-up and the number of connectors to write not?
Based on Google he has 2 8-pin connector, the third through this adapter to connect:
Go like this:
If you have such a line-up of course. If not, buy a normal unit with 3 8пиновыми and throw this in the trash.
as was signified the problem is solved by using adapters to Molex. buying a new unit is not required.
tonight, I will upload a picture of what's inside the system unit, if not what you need.I once threw a no wires needed.
axmad
And show the overall picture, just wondering how you do the graphics card fit in the case. Or have you still not bought?
axmad
With its location in the system unit and not the system unit. How to put snap a pic I want to see how this huge video card fit.
axmad
tip before inserting be - clean computer. All of these mesh wash under the pressure of the water and thoroughly dry it, don't you see what tracelink in the block?
axmad
axmad wrote:
The map is, well, not set, since there are no wires.
But the problem is, wires have 2 8-pin ones that are red and 6-pin, one which is red (it unites through the adapter 8 pin) the whole thing is inserted into the video card and the cases.
a video card requires 750 watts, and I have a block 750. here it dose it will or will not pull.
the wire has 2 8-pin ones that are red and 6-pin. And where you saw, on the screens of all the wires, there is not any more, the rest Vicini a long time.