Help find out the cause of failure
Guys, Hello! Collected a computer from scratch, everything worked perfectly for two weeks, and then abruptly appeared blue screen of death and Windows stopcd. The comp reboots, there is an inscription ASR, and he gives this blue screen and again restarts indefinitely, or hangs completely. And did not manage to the end to find out why, although everything seems to be leading to the motherboard. Situation following: the computer sees all the components, RAM tests, video card is also working, with hard drive problems it is not revealed, BUT tried to connect other hard-to-PC, and as a family can not go to Windows, although everyone reads, sees everything. When you try to reinstall Windows, the system also sees everything, but when I start the install (at least with the stick, at least from the disk), the icon appears on the Windows before loading and at this point everything hangs. Demolition of the BIOS and put a new one, the problem does not change. Mother MSI B250m pro-vd, percents i7 7700. Can anyone have some options, what's the problem? Help pliz, I don't want mother back in Germany to send, especially at 100% without knowing why.zuuc
I then said that to install Windows that block would still be enough? and the computer is not able to run or just go to the desktop. is it really so? or if it is already broken, that this situation is also possible that only the BIOS and then goes nowhere?
Yes, installing Windows will probably allow you to run but not a fact, because when you install the hardware does not use its full potential, and therefore consumes less(voltage)
wy_vern01
how do you build going? You have a very weak PSU, that got out of the problem. And most likely the motherboard really is broken
zuuc
so, if it's not the PSU, then I have for such a system is insufficient and in any case it is advisable to replace? or theoretically, if you solve my problem, and with this power he will be able to popehat a certain time?
if possible throw any unit(even with fewer watts) when the system startanet so it's in the block.
failure of motherboards is possible but highly unlikely, but the unit is completely
Metalist1925
a motherboard could be damaged due to insufficient power of the PSU? you don't tell us so I can try it out on this issue.
should be replaced, the reserve power will not be superfluous.
suddenly you want to put another hard disk, or some other periphery
wy_vern01
Izi problem. How to do it. 7700 ? Throw the multiplier to a minimum, which allows. For example 15 or 20, that would of worked processor at 2000 MHz, you know. Then fix the voltage to 1.2 V and try to start. If everything starts and no blue screen, it means 80% dead CPU. If the problem persists, it is better to bring in services and to run the processor itself on another Mat. Board. If it is okay, it is dead mate. fee 100%.
About the PSU, the comments are just hilarious. I have a cooler in your system 2 times, in games eats a maximum of 450 Wat the an hour-long, what are you?
Power PSU is enough, given that this is Seasonic. In addition, the consumption in idle is minimal, don't you think?
About the problem I can advise you to look at the SATA mode in the BIOS (put it on AHCI if you have installed something else).
Remove the video card while there is uncertainty . The processor with the graphics core, so that power supply to run the update enough . Better BIOS to reflash in service . Me DNS service reflash and they third-party sellers do, and so, too, suffered that on the website of the manufacturer Mat.Board downloaded got it wrong. When comp. will start to fly then a graphics card to connect.
Ace of Spades
but perhaps I have not locked multiplier? I could not find where to throw, you tell me?
Kirlusha
here are gathered a collection of pictures of the blue screen, but that's not all options. http://dropmefiles.com/cReaq
wy_vern01
If I remember correctly he zablochen above a value (40-42) But not down
Well, the author has ignored my post, but I already clean professional in the interest of: Windows won't boot even in safe mode?
Sanchez Ramirez
I'm not ignoring you) you wrote that the unit is suitable, this is I think a response is not required. And regarding the Sata work all right, as far as I know, there is nothing changed to failure, and after failure tried Ahci, and through the second: Optane mode he seems to say. so I think the reason is different.
but using safe mode I tried to go in the evening make - unsubscribe necessarily.
wy_vern01, and if the computer hangs in the BIOS? If not, then the mother if not nothing to do with it, and you need to dig in the direction that was set (prog/play/diver) immediately before the first blue. Or in the direction of the operatives. Even if both modules are working, and if you boot from another module?
As for the power supply, the system uses the height of 250-270, and it's not even a regular gaming load. Unit is more than enough.