FAQ (The Elder Scrolls 5: Skyrim)
For who wants uluchshit schedule, go to Documents\My Games\Skyrim open SkyrimPrefs.ini and make these there are changes.iBlurDeferredShadowMask=3
Changes the sharpness of shadows, does not really affect the frame rate, so that you can raise higher. The minimum is 1, but I recommend to put on 2.
fTreesMidLODSwitchDist=0.0000
This stat affects the detail objects in the distance. Can deliver up to 10000000.0000 to significantly increase the range of visibility.
fShadowLODStartFade=200.0000
Affects the quality of shadows of objects in the distance. You can raise up to ’1000.0000R42;.
iShadowFilter=3
Affects filtering of shadows. From 1 to 4. 4 shades are of the highest quality. Much impact on the framerate.
bTransparencyMultisampling=0
Change to 1 to enable multisampling.
iWaterMultiSamples=0
Improves the water quality. From 1 to 4. The higher the number, the more resources you need.
bTreesReceiveShadows=0
Activates the shade of the trees. Put 1 to activate the shade. Same effect on resources.
bDrawLandShadows=0
Activates the shadow of the earth. Put 1 to activate. Consumes a lot of memory video card.
fGrassMinStartFadeDistance=0.0000
Increases the amount of grass on the course. Consumes huge amounts of resources. Increase of more than 400 only if you have a powerful video card.
iWaterReflectHeight=512 / iWaterReflectWidth=512
Affects the quality of the reflections on the water. The higher the value, the more resources. 1024 becomes beautiful, but only when a powerful video card.
uiMaxSkinnedTreesToRender=20
If you have low texture. We can increase the number to improve quality. You can start the test with 40, but will begin to affect fps.
Here's a few more selections in the file SkyrimPrefs.ini:
bUseWaterReflectionBlur=1
bReflectExplosions=1
iWaterBlurAmount=4
bAutoWaterSilhouetteReflections=0
bForceHighDetailReflections=1
Five of those stats will increase the rendering quality of the water. 1 – then the function works. 0 – disabled.
BlurAmount=4 – maximum quality lubrication effects.
All the stats are very demanding.
fBlockLoadDistanceLow=50000.0000
fBlockLoadDistance=125000.0000
fHighBlockLoadDistanceLow=20000.0000
These stats affect the visibility of objects in the distance. If you want to improve the quality, add them in the.ini file.
But just say I have a gtx465 as everybody was flying and flying, so that all owners of all sorts of geforce 9xxx,8xxx,radeon 2xxx and 2xx,3xxx,4xxx series even, and I advise not to meddle, and the owners of powerful vidyuhi certainly fix the schedule will be simply chic.
Problems with the cursor?
Below I will give you all sorts of solutions to problems.
Step 1. Custom the same sense along the axes:
Go to the directory in the game folder and run .ini file using Notepad (Steam-steamapps-common-Skyrim-skyrim-SkyrimPrefs). Find the section [Controls] and insert two meanings:
fMouseHeadingYScale=X
fMouseHeadingXScale=X
where X is the leading variable. Initially, these variables have different meanings and therefore should be set similar to each other:
fMouseHeadingYScale=0.1100
fMouseHeadingXScale=0.1100
then the cursor moves with the same speed in both directions.
Step 2. Remove the lag of the cursor.
Go to the directory in the game folder and run .ini file using Notepad (Steam/steamapps/common/Skyrim/skyrim/SkyrimPrefs). Find command:
bMouseAcceleration=1
and formanite a value of 1 to 0. Also don't forget to go to settings Mouse in the Windows control panel, click on the tab pointer Options" and uncheck (if necessary) with parameter High mounting accuracy pointer.
As a variant (in order to be sure), download and install the latest driver for the rodent from the official website and do the same manipulations in the settings. But we want to warn you, sometimes the problem is solved in exactly the opposite - removing the driver. But it helps and is quite rare, and the user generally already knows about such nuances of your mouse in other games.
Step 3. Solve the problem with the smooth\locked cursor behavior.
I think this issue infuriates many players because of its annoying-ness and trudnoreshaemyh. In my example, I have a MSI Radeon HD6850, control center AMD VISION ECC latest version (Ver.12.2) and Directx 11 via automatic updates on Windows 7 Ultimate.
What is the problem? Here is a trivial example. Many of you in the past, and may still play Counter-Strike 1.6 flying at 60 fps. Cool. Cursor lags, moves smoothly and it's very annoying, after another bullet in the forehead. The same problem may be present in the majority of players in Skyrim. Solution:
1.Disable Vertical sync.
Go to Your control center graphics card (depending on the manufacturer of the video card) and in the tab of configure 3D applications remove the check mark from the option Wait for vertical refresh (AMD) or Vertical sync pulse (NVidia).
2.Go to: My documents/My Games/Skyrim/SkyrimPrefs and under the [Display] insert the parameter:
iPresentInterval=0.
3. Take the value of screen resolution and follow the link:
http://www.rjdown.co.uk/projects/bfbc2/fovcalculator.php
Offered its value to the screen resolution and get the desired value of FOV.
Then go to SkyrimPrefs (My documents/My Games/Skyrim/SkyrimPrefs), find the section [General] and below add this line:
fdefaultfo=XX
where XX is your desired value of FOV.
FOV, and I quote, is: field of view — angular space, a visible eye with a fixed gaze and motionless head. When we need the value, we achieve the best behavior of the cursor during the game.
4.Download archive:
http://rghost.ru/37217128
Unpack two files: antilag and d3d9.dll and transfer them to the main directory of skyrim.
After that, open the antilag file using Notepad and find the value FPSlimit=80, then change 80 to 50. Also You must have a full version of Directx 9.0.
PS the Link to the archive is available for 30 days from the time of this writing, so for the future generation link attached:
http://www.pixelrage.org/download/Anti-lag-1.01-for-Direct3D-games-4394.html
or Google for the English version of the website.
After the above manipulations, I have a problem with the cursor decided by 90%. Because of the built-in sound card, the game is partly in conflict with it, which leads to lower FPS during a game with massive battles (in Oblivion, this problem was solved by turning off the sound in .ini file, which is in itself funny, and a patch to fix this bug, never happened). So if you have the money, I advise you to buy an inexpensive separate audio Board (e.g. ASUS Xonar DS) and remove load from the CPU and enjoy high quality sample rate + the solution to all problems with sound and the attendant problems with the cursor.
When you expand the game over the top of the window there is a cursor Windows, how to remove?
Restart the game kills the cursor in 100% of cases. Several times to collapse and expand the game, expand the game via Alt-Tab without using the mouse - sometimes it helps. He ban occurs when repeated folding and continuous operation of the game without restarting.
Hello! I want to talk about solving the problems associated with the establishment of a DLC in Skyrim, when in the launcher does not work at all count all FILES or is not working partially. She bumped into her, and I found a lot of solutions in Internet, but all were not working, and eventually found the solution myself. Now I want to share, can someone come in handy.
Mainly for those who are not helped by the wide-spread Board in the Internet: To run the launcher:
If you do not see the launcher Data Files, then you need to open a file on the path
From/Users/username/Documents/My Games/Skyrim/SkyrimPrefs.ini
in the section [Launcher] (at the bottom) add the line:
bEnableFileSelection=1
It is possible still so:
bEnableFileSelection=1
bShowAllResoluti1
uLastAspectRatio=1
Now you can attach plugins via Data files.
Wrong myself the first time encountered: bEnableFileSelection=1 was set in the bottom of the file, which Data Files did not work. Turned out I had to look for [Launcher] and only there to insert.
1) so you've played Skyrim, the release versions since late last year or early this, and you are in the launcher not working the count FILES. Then came version of Skyrim propathene and additions. You of course have downloaded and installed the newest version of Skyrim, the saves you did not delete, since you want to continue the game is already a developed character, but to play in DLS fails because the launcher not working the count FILES.
2)the Problem lies in the fact that in addition to the left of the saves in the folder at the address: (for those who have Win7) - drive C -> users -> user name Libraries->Documents->My Games->Skyrim = not only are your saves, but three documents: RendererInfo, Skyrim, SkyrimPrefs. The point is, if you have not uninstalled daddy, these documents have values for the old version of the game, and when installing the new version, override its value. (Change in these documents that either useless, does not help).
3)Solution: move Your Seva to the desktop, without these three documents, and then completely delete the Skyrim folder (on drive C). Put a new version of the game (better from Fenix updates the end of August or beginning of September of this year), then returned to your saves there from where deleted, run the launcher and see that the graph FILES are working, press and can see all add-ons that have been installed by you or sewn into the game, then do the graphics settings, and run.
4)Summary: the Saves work, add too. Play and enjoy.
PS: For those who have Windows XP, here is a sample address of your saves: My computer-> My documents -> and then looking at them, daddy My Games and Skyrim already in it, or in my documents are looking just for daddy Skyrim.
And even one of Skyrim, I used to love after all the official add-ons, I recommend to disable the official.DOP. in the launcher on the texture, only two of them, or to put low quality graphics.
Tautatis
Alien soul darkness, who will guess what are you in the game stuffed. In such cases, it is necessary to have a folder with mods in the event of reinstallation.
nestrbob
Yes, well, it's clear(( just maybe there's a prog that saves looks and sees what was staged fashion??
Tautatis
If you didn't know anything about creating mods, it is simple to slyapat for half an hour and call it whatever you like. It will work, but knowing about its existence will be only you and users of your mod installed. Fashion mostly and make enthusiasts, in addition to the official category which was developed by a game developer. The name of the mod file for the game does not matter, you can rename the main extension to keep and will re-launch the Launcher because is the download list by the file extension. The mod will work with the same settings, only under a different name. You can create some sort of global mod, which will bring together dozens of small and will work one for all under one name. To create a program, to compile a list of mods in the game, is not possible. Get in the section Files and remember what was set previously, and new useful mods not enough.
I'm kind enough,and FAKYU went because I thought that discussing the theme of the game,but here the opposite question-and-answer.
but my question is this,what the dying traveller? stand up or turn gray and then stands up.The younger brother says that it is because of the difficulty I have,and I was already the beginning of the difficulty, and I have not changed,and there was no choice to change it.
Tatarin2
You're probably talking about the companions. In many quests, the scenario they will be given immortality, but outside of the script, GG it is free to fill up(with ends).
nestrbob
So it turns out that when you go on the main mission, it is not besmertny or what?
That's one of the first city after ubienija from the dragon took Capranica,so light it is still supposedly one girl was in love,I helped him and after he was prisoedinilsya,so here I am with him and in another nearby city from above ran it there and the guard thrashed and Storms bratsvo,but uploading some of the places he was alive,tried to truck even in the With as the city called it at the end of the whole map,but still complete nonsense.
so clearly my brother was not right that the level of difficulty is all probably just to tell him was not what he here your humor and coconul,and I believe that it is necessary to change the level of difficulty.
How to know the levels of enemies, undead, etc.? And it says, for example, when using enchanted weapons, undead up to level 13 takes flight, and what is the level of this undead is not visible.
How to know the levels of enemies, undead, etc.?
without cheating - no way.
undead up to level 13 takes flight, and what is the level of this undead is not visible.
will give this coverall in the face and see - to flight or not.
btw, the 13th level is a Draugr Wight, a small thing, Draugr Wight Lord and all the Scourge and Death draugry above.
Draugry with unique names - probably you too, they grow along with the Persian (50).
so enchanti at senior levels does not rule, and similar spells need to amplify perk.
people have installed the game, wanted to tweak the box and in the settings, only the built-in graphics adapter(intel hd graphics 4000) how to change my graphics card(amd hd7670)? other games, as you yourself recognize that it is better, but in Skyrim only the built-in works
don't know where else to write, topics, technical issues or something like that not found
Three weeks in Skyrim is not played, or what side was not touched. Start today - after logo the conversation takes off. 3 weeks ago I played, everything was normal.