High latency (90,100 NS) How to downgrade?
Good time of day. I have this problem.Sags fps for a split second, despite the fact that the average fps is high and the iron is quite powerful.
Tolerate this is probably the year
RTX 2060 (her 1 year), the temperature in games 65-70 degrees
i7-7700K (he was 2 years old), the temperature in games 50-55 degrees
DEEPCOOL deepcool gammaxx 400 BL (he was 2 years old)
RAM x2 8GB 2133 frequency (in 2015) and 2400 (her 2 years)
Gigabyte GA-B150M-D3H (2015) Which sort of supports a maximum of 2133Mhz frequency RAM
Power supply (450w) and the hard disk is also 2015
I through program AIDA64 ran a test on the RAM it showed that I have a latency of 90 kopecks, how can it be lower?
Below are 2 screenshot (mine) and 1 more how it should look in a healthy person
1 and 3-the Witcher 3
2-PUBG
Can we draw an analogy with any game, I get this everywhere.
First you need to rearrange laths of the RAM in the gray slots on the mother to earn dual channel mode
George Timoshin
There was a new problem*
Fps is now stable everywhere (the spread is only 2-4 frames), but the game began to take off (just throwing in Windu)
Any ideas how to fix?
mandie_e
BP check (Stress АИДЫ64+Bagel)-look at the drawdown on different lines.. Temperature VRM motherboard a look. But better consult someone who this farm you collected.
Memtest ride, maybe memory errors or the controller.
Ryazancev right, it's all business to protest, the problem may be due to the different rangamati memory or nestabilnosti(large ripple) of the voltage from the PSU. Need more info what happens at what point, what has changed in the behavior. You can also try to swap the two memory modules in places with each other.
George Timoshin
The problem was solved by adding a swap file. 2GB set and all passed.
Funny thing is I found out after I slipped DDR 2
This is the only game that justified its departure on the Desk)
mandie_e
You in the comp mate.latu , the RAM , the power supply to be replaced by more worthwhile and be a normal PC .
ADEIROS
To be honest, I can't even imagine how you managed to bring up a topic 2 years ago...
Well, if so, then describe your situation in more detail. What do you want to change and the full names of all components.
Deshang
qq, you can help, actually saying this is what and how,
.png)
.png)
.png)
.png)
but the whole problem is that during games there are frequent friezes, and I xs how to get rid of it ...
dragonhearts
If suddenly it's still relevant, which is unlikely ..
Try to overclock the RAM, first set the xmp profile, it will most likely be at 3000 / 3200 MHz, this is already better
Lex-one
What about the timings? These are the default values ​​for ddr4 according to the jedec standard.
Deshang
Well? What's wrong? Jedec is a standard that guarantees that the memory will run, nothing else. The problem is in the timings, I have a 3600 even better.
Denis Kyokushin
He has jedec, don't disturb him.
Lex-one
Lex-one
Don't be stupid. He has a memory in stock, inserted and did not activate xmr.
You are more careful with arrivals, otherwise you took some miserable 3600, set the primary timings and are already trying to tell something.
Denis Kyokushin
Thank you, cap.
Here are the screenshots purely with xmp without torsion timings. On Matiz, latency can still be flattened, if memory allows, if memory is not gaudy.
Spoiler
Deshang
Cap or not cap, but 90.7ns is too fat even for intel
dragonhearts
Download ZenTimings and put the screen here:
Spoiler