3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
K
Kolik0550 11.06.20 09:05 pm

Overheating of the PC. What is overheating?Please help.

In General, the computer shuts down with a little work under load.Then trying to turn on and off again several times and then turn on(obviously when it's something cool).


Iron.



157 Comments
Sort by:
K
Kahran Ramsus 11.06.20

fOXY9
And to sit simultaneously on overah and then you think people can't? REALLY can help in normal servisnika, seeing the iron, And so is self-indulgence.

Replacement case with normal cooling, almost removed the problem with the reboot obviously been overheating. You just figure out where I want to hang a thermocouple on uinic and savernik and look th there. This nurse and so they are not very cold, and a stove in the form of a card and stepped on the gas pretty good.

K
Kolik0550 11.06.20

The main thing is to reason logically.
Time the PC is turned off only under load from this we can draw the following conclusions:
1.Under load, everything starts to heat up in the body.
2.Begins to load the PSU.
3.Start to load components.
Times separately loaded all the components and all the way through to sin on something from them is stupid.Option 3 is eliminated.Because the components most likely to do with it.
But improved cooling as we can see given the obvious result. So option 1 is probably closer to the solution.Something warming up and that's a fact. Best in the new building was BP, now that he takes air not from the housing and from the outside. And when you consider that he works at the limit or so, then cooling him the benefit clearly.
Another such moment.Time to stress test the PC was cut down quickly 5-8 minutes,and in games much later, it also indicates that something is hot,but not as fast as the load in games is less than in the stress test.
Now stress test the PC holds for 30 minutes (then tried).I was really was(when the picture freeze and nothing could be done),but it was 1 time.After I updated the driver for the chipset of the motherboard and set the BIOS to optimal settings(this point there was Load Optimal Settings).At the moment everything is fine.

K
Kolik0550 11.06.20

fOXY9 wrote:
2) the Location of the power supply incorrectly
It is what it is provided by this case.
fOXY9 wrote:
4) look at new CPU coolers, such as Zalman or Noctua, pay attention as there are turntables.
Yes, already looked away https://www.ulmart.ru/goods/3851621
fOXY9 wrote:
5) in the old building, the old (outdated) problems, get cheap body for 3-4K.
Already taken.Wrote posts above. https://www.ulmart.ru/goods/3412482

p
predator-mk 11.06.20

and not a lot of thermal paste are you there namazyukali???need a thin layer of very t once

K
Kolik0550 11.06.20

Was musucal as always.Compared to what I saw on the video card,I'm very thin layer smeared)There is already the edges were piled with relish(native compound)

K
Kolik0550 11.06.20

At the moment, so simple.

f
fOXY9 11.06.20

Kolik0550
Good pace, how many degrees outside?
In General, my friend the admin says: works - do not touch. If simple VisaNet system, or bsdnet, then dig to the side of the capacitors. Mostly this happens when dry conder in the area of patalenica percent.

K
Kolik0550 11.06.20

25 according to the thermometer home)

l
lokkie 11.06.20

Kolik0550 wrote:
Times separately loaded all the components and all the way through to sin on something from them is stupid.
Don't know what you've loaded, say you change the unit:

K
Kolik0550 11.06.20

mmm show me the results of your healthy power supply

l
lokkie 11.06.20

l
lokkie 11.06.20

And that's not all.
Gigabytes they are generally hardy, what other mother would've burned I guess. But, put a normal block, and it may be that with normal voltage it is not working, I mean burnt. Wrote above, I have the new Gigabyte combo cover with the unit.

K
Kolik0550 11.06.20

Don't see any deviation beyond a given table. And atscreen their performance. Compare.

l
lokkie 11.06.20

Put a new block, and when you first start this one poked Delete, what would you first start the BIOS and not Windows. Or another button that opens the BIOS. On GB, this is usually Delete.
In the BIOS go to the page electrobite, and poke the button to optimize. On GB, usually it is F7. Poet hold, usually the key is F10. After saving will reboot itself... and cross your fingers, spit over your left shoulder, simultaneously dancing a jig... a black cat can bring ... well, you ponil. ;)

K
Kolik0550 11.06.20

So with your sreen voltage on your PSU healthy?

l
lokkie 11.06.20

That you're impatient. )



K
Kolik0550 11.06.20

I write for those who have a similar problem.In General, the problem was the power supply.He lacked power.Hence, overheating of the PSU and then reboot the PC. To replace it bought corsair RM550x.Set at the beginning of November,now the end of January and 3 months normal flight.