Projector for GAMES and movies
With the panels all more or less clear, but I conceived myself to take the projector for a toy that take? and what firm? I read that they have the input lag is large, so that even in the company bad to pass to 60K is the ceiling.So what do you really want to take the panel? The panel will have less and less, and the canvas on the wall should not be taken, but of course there will be more space. Will you play on the console or on the PC?
Petruxinson wrote:
and you don't have to take a canvas on the wall
And with the projector you can display the image on the wall, as long as the wall for this was prepared.
Zatainer wrote:
read that they have an input lag a big
There is such, but it is necessary to look at models with short-focus lenses and with adjustment of scaling and the projector goes into the category of gaming. And in such models already have game modes.
Zatainer
I took a projector - you can play, at first interesting, but then getting used to the big screen occurs, there is no effect, and if the DLP then the lamp is not eternal. It is better to take a big monik good for games or TV.
Protocol10
It's never like that forever. The panel, too, may die after a while. By the way, what did you play on (console, PC)? There is just a chance that playing on a console with a projector will be much more comfortable than on a PC. Was there a big delay?
Petruxinson
on pc played, put a few games in particular fallaut 3 and Witch 3, the delay is there and play is not particularly comfortable. In general, I do not see the point in the projector for games, here is a movie yes - it is worth it.
Protocol10 wrote:
and if the DLP is not a perpetual lamp
I agree not eternal, but I have looked in the price range suitable projectors up to 60k Ben' TH671ST, Viewsonic PX706HD, Acer H6517ST all have a life of 4000 hours, and it is 166 days, well, if you watch around the clock. So I think enough for a very long time, but here at the weather life of this lamp on the economy mode as much as 15,000 hours, it is not clear just what can be done on this economy mode?
Protocol10
What's a pro-sator? Can we say that they are - all on the lag the same, and for all at once I say that I want to arrange my own zone of gaming, the panel is large does not fit, and it is much more expensive.
DikeyFive wrote:
0k Ben' TH671ST, Viewsonic PX706HD, Acer H6517ST all have a lifespan of 4000 hours, which is 166 days
so everyone says as if to change the lamp is more expensive than the projector itself.
Protocol10
Well, he doesn't have any functionality that reduces imputage lag. Accordingly, it will be a little more than in the TELLY. This also superimposes the delay of the PC itself, so it turns out that is not playable. Although it's interesting, it's not exactly the games in which they need a little lag.
But the PX706HD looks more interesting here.
Petruxinson
it's clear, even if there was a lag there was a fast - the projector full xd, and I long ago on 4k crossed, 1080 I do not enough.
Petruxinson wrote:
Well, he doesn't have any functionality that reduces imutation lags.
Well, I was the first vice-chancellor to look at (which the review found) Viewsonic PX706HD- it says that there is a type of 3X Fast Input, and that when it is activated nothing noticeably changes, that the projector itself and without it chips a small input lag.
Protocol10
And here is each his own.
Zatainer
Well, there can't be a projector with a little lag, they're by default with a lot of imputation, like telly. 3X Fast Input lag decreases relative to other projectors, you can certainly play on it.
Well, then I'm waiting for a reasonable answer to the question why, and here at all T.D.A. if the way of forming the image they projectors have nothing in common. I'll also leave a review of the https://3dnews.ru/991138/obzor-viewsonic-px706hd which says lag. And once again I will clarify that this is not about cyber sports, but just singles
Zatainer
I never told you you couldn't play it. Just explain that the singles drive on the PX706HD more than. Iput lag less than other projectors, it is interesting that just so accurately measured when activating 3X Fast at once 16.3-16.4 ms. Just wondering, if you do take it, write off really there is a double feeling when activating this feature, purely on your senses.
There in the review by the way it is written that it is when activating 3X Fast especially nothing happens and even without this chip, the projector works in toys with good responsiveness, or speaking in another with a small input lag, just I was wondering where the information about the "double sensation"? Maybe everyone just feels different?
Zatainer wrote:
Maybe everyone just feels different?
Maybe it is, as some see the difference between 60 Herts and 144, and someone says that it's just marketing. Just as with the delay of the projector, the manufacturer states that the output delay is reduced by 3 times with this function 16 ms vs. 35-40 ms. It is necessary to measure, although as some claim that the monitors see the difference between 5ms and 1ms.
SPR1GGAN
Here is an overview of a certain cheap projector with a crooked set matrix, which does not connect to anything (although it should) because I do not see the point on the basis of this review, to draw some conclusions about PX706HD, there are no problems with the obvious lag in it.
Zatainer
there just on the example of one of the projectors talk about all projectors, about the color operation, about the need for the area for the projection and attachment of the projector itself, about response time, etc., many points are universal for all projectors
SPR1GGAN
It's far from true. There are projectors who give a gorgeous picture, and they have them no worse than on the TV and some monitors. Although it is necessary to consider a certain projector. And the PX706HD has no problems as such for this price category. The video is a little wrong, do not use the example of one projector to generalize it for all.