Additional strap RAM on a laptop
After you install additional strips of RAM, the laptop turns on from the second time, i.e. after pressing the power button on the screen logo of the manufacturer, and the OS is not loaded, then push the button off and again to include - the operating system is loaded, works perfectly. What's the matter?Configuration laptop profile.
Standard plank: ADATA, 8Gb, DDR3, 1600 MHz, CL11, 1.5 V
Additional strap: Crucial, 8Gb, DDR3L, 1600 MHz, CL11, 1.35 V
Cues the difference?
Standard plank: ADATA, 8Gb, DDR3, 1600 MHz, CL11, 1.5 V
Additional strap: Crucial, 8Gb, DDR3L, 1600 MHz, CL11, 1.35 V
Both should be DDR3 or DDR3L
t830x
So overall the rules work. However the second strap stopped working after 3 months. Changed under warranty, the situation is the same.
vatsonification
to work properly the strap system must be identical to the vinaigrette in the slots with the RAM before a fall)
vatsonification
No, it's not right, buy the same DDR3. even the manufacturer should be ENTITLED if not on sale then buy 2 laths on 8Gb DUAL KIT that is, the two are the same in all straps tested to work with each other
<vatsonification
Perhaps the reason is that when you first start the motherboard equalizes and takes the strap in both 1.35 V, which not enough native. Maybe you just need to update the BIOS?
Спойлерhttps://ru.msi.com/Laptop/support/GE70-2PL-Apache.html#down-bios
MiGamer86
Thank you! And could this be the cause of the failure of the second strap?