The black screen was snuck in...
Good evening, not turned on the comkm shows black screen. Climbed a bunch of sites, everywhere everything rests on the operative mall, cleaned with eraser, etc. Then tried another power supply to put, too, not an option. sorted through three times the comp all cleaned from the dust, glitters cooler than the eggs of the cat. And that's when tried to run without the comp operative it also runs into the black screen all lit all swirls but the speaker is silent as partisans. And somewhere found the info that let the computer work for 5-7 minutes and check to the touch of the north and south bridge on the temperature and processor. The south was warm, the north was still hot, the radiators over the power processor were very hot compared to other elements, but the processor was barely warmer than room temperature. Doesn't that mean that the processor is dead?? I kind of wrote it all.P.S. Mother: asus sabertooth 990fx r3.0 Percent: fx 8320
neoandpha
And we're tutki xD
The speed of proceedings with violators is significantly affected by the "complain" button under the message xD
that's how this bastard turns on without operative and see-off. It's been five minutes since it's all working. And the speaker is silent.
But if you click on the MemOk button! Then it will start immediately. And he'll squeak if you take away what's beau
ivan well-fed
Ivan well-fed wrote:
And the fact that 11.788 volts in place 12 is tritical?
Within the norm. If this is the testimony of a program, and not the result of direct measurements, then they can be ignored
ivan well-fed
And if you reset the bios? Leave, say, one memory bar, get the battery from the board for 10 minutes (maybe more), then back stick and run, you have to try.
1_AID
That's just inserted into another comp and he calmly started with it. The see-off works.
ivan well-fed
Bios shows if there are no problems or no disk, roll up the operating system.
That's it, solved the problem. I bought a new percent, my mother, the operative. Now everything is working fine)
It's almost like here and I have a problem. Mother (old) yesonic E61fel-u percent and5 3470 4/4 ddr3 video 1050..everything has worked for more than a year. The mother of the ace rock z170pro4s q 2 by 8 operative ddr4 radion.500 BP stone and5 6400...on it stuck his seer. The flight is normal. before installing firewood on video.. in the process of installing--black screen .. trying to insert into the old mother mind--black screen. checked on another computer video-works norms. What a sadness? benefit on her (mother)... There is a built-in video chip. what kind of tambourine is needed to defeat the trouble.