The processor is very hot (Dying Light)

propeller-faust
Here are the metrics in SpeedFan
https://pp.vk.me/c621727/v621727140/10da7/9a8zLLb30AQ.jpg

nikita2112
Yes, I'm not hot or cold because you believe me or not, but the fact remains the fact 14 in idle time, you just need to periodically clean the computer and change the thermal paste.
And in my apartment +26 ° C

Sam Smith
I experimented. Then I drilled holes in the lid and screwed on the valve for blowing:
http://www.regard.ru/catalog/tovar110882.htm
On the cooler for blowing the second one and blowing it to the back wall of the system unit. Quiet, beautiful. Paste stg1.

Here is what happened: Here it became:



Aida 64 showed my CPU rate at 128g:

Yamaguchi-gumi
Listen, come on, smart guy without insults! How else can I explain to you?

nikita2112
Who interferes with pouring liquid nitrogen)?

In, glitch:

nikita2112 The fool
is apparently you, How can the processor be colder than the surrounding air? Have you ever heard in your short life what a good cooling system is (not only a processor, here you can also include the case, what kind of air circulation there is in it, how many fans are in the case itself (and if you have a plastic minitauer for 3000 rubles, this does not mean that everyone has such a)), a dust-free computer, a timely replacement thermal paste ..., a rhetorical question, apparently not. And there is nothing to bend your fingers here, But you are especially gifted with whom it is with you, specifically with YOU, so we are not familiar with what you would throw such a presentation ...
Ninzya62
Yes, many people, at least the absence of liquid nitrogen as such, no one will sell it to you and where did you (hypothetically, you get it) intend to pour it into the water cooling system, it will not withstand such low temperatures, and such cooling is not needed at all ... Or do you mean freon cooling, so there is not nitrogen, but freon (for reference, this is the thing that circulates in the refrigerator)

JOKERIVAN
Ahah, made me laugh, you can't buy it anywhere ??)) Liquid nitrogen is not uranium, it seems to be even cheaper than Coca Cola. You can safely buy it where it is made. Of course no one will sell you a liter, but you can. YouTube is full of videos where they do all kinds of crap with nitrogen, and even videos where they buy it.
And you need to fill it in a mold, which you attach to the process, so that the bottom comes into contact with the piece of iron that sits on the processor.

Ninzya62
Yes, I also watched these videos and I also heard about the fact that a liter of nitrogen is cheaper than cola, but no one will sell it to you, because they sell it not for bottling, but in large canisters, and the canister, by the way, is also not free.
And you need to fill it in a mold, which you attach to the process, so that the bottom touches the piece of iron that sits on the processor. WHAT hahah ... dude are you serious ?? I have never heard more nonsense in my life, do you even know what nitrogen is ?? it has a boiling point of -198 ° C, if you pour it into a mold and seal it tightly, it will simply tear it apart, but if you don’t seal it it will evaporate, or are you going to attach the dewar vessel to the process and keep the computer in the freezer? Oh yes, nitrogen also has a shelf life, it does not "live" for more than a week

JOKERIVAN Did
I tell you that it should be sealed. In general, by pouring nitrogen on a percentage, I meant what they do on the internet. Did I say that it will work as a complete cooling system? Yes, you will only pour gasoline into the canister, and nitrogen will be stored in a special thermos. And why buy a thermos there if you can bring your own!

Ninzya62
And everything is new, although I already wrote about it, if it is not clogged, it will evaporate this time, no one will pour nitrogen into your container, they do not sell it for tap, this is not beer for you ..., these are two
"In general, under the filling of nitrogen per cent, I meant what they get up on the internet" and who is doing this, myth destroyers ??
Did I say that it will work as a complete cooling system? and this is your opinion about "And you need to fill it in a mold, which you attach to the process, so that the bottom comes into contact with the piece of iron that sits on the processor", I initially said that this would not work, so why then all this conversation, if you give up your words

JOKERIVAN

Ninzya62
here is the demonic and the rights of some sort of myth destroyers. Here I admit you are right, this procedure is possible, but the fact remains, how the cooling system will not work

JOKERIVAN
Well, I didn't say that liquid nitrogen will work as a full-fledged cooling system, just for fun)

I don’t understand why the guy was advised to use real nitrogen to play Dying Light?

Ninzya62
Download Hwmonitor. Run it along with the game, as soon as the tempo rises close to 80g, take the screen off the program and here, in the studio, fill it

In reality, cleaning dust and dirt is worth doing at first, in 80% of cases this is the cause of all troubles

Den-z2011
https://pp.vk.me/c623828/v623828140/1b2a3/mLcVIHAol4E.jpg

Ninzya62 Is

inclined to think about poor cooling of the case
If a 120 mm valve fits into the front wall of the case, then put this one on the blower:
http://www.regard.ru/catalog/tovar149871.htm Put it
at max speed.
It can be more expensive:
http: //www.regard.ru/catalog/tovar135253.htm
It is louder, but with a higher capacity of the volume of air
For the back wall, so far I have found only this one:
http://www.regard.ru/catalog/tovar134798.htm
You burst great 92mm valves can be found with difficulty. I won't say anything about good ones. Open the case lid and play with it open. Do not forget to add another valve to the cooler for the processor. There, it seems, you can put a second one.
I have 120mm for blowing in general two from below. One was in the case, the second I added without fastening

Den-z2011
Thanks, I'll try =)