New device! - Toyota Land Cruiser, 4.7 L, 2005

I very much doubt such numbers ...

KoDD

This hat is called a turbonator www.turbonator.com/ Do not indulge yourself with illusions associated with this kind of pribblud)

there is also a mini supercharger motor in the turbocharger and this is something like a swirler))))) it is
unlikely that there will be any sense

Let's see! ) they have a bunch of papers, patents, etc. crap, time will tell!

This hat is called a turbonator www.turbonator.com/ Do not indulge yourself with illusions associated with this kind of pribblud)

maxyrius

well standing wave ... heze. I know the resonant one, that's why the spiders weld at certain revolutions set, this is when the shock wave from the exhaust valve reaches the expansion of the pipe (narrowing) and a vacuum is created near the valve at that moment, if at this time the valve is opened, then the working out will simply suck like a vacuum cleaner! but it works at certain speeds and at a certain distance from the exhaust valve ... blah blah blah ...
... and this shnyaga is easy to check, take a hollow pipe blow into it, well, what is the strength, and blow into the same pipe with such shnyaga ... I think it will be everything is clear =) ... though the lungs are not enough alas =).

тут какой то хитрый принцип утрамбовать поток и разогнать его посильней… но на это нада тоже затратить энергию…а откуда ей взяться то? снова от мотора, получится что то что мы выигрываем мы тратим на закручивание воздушного потока 0_о… не изобрели еще вечного двигателя — из нечего энергию получать.

кстати если это так гениально и просто, что то не заметно что производители начали во всю эти турбинки ставить…хотя не ! вру у меня в резонаторе такая шняга была, ну не такая, там просто выштамповка завехрения в трубе, по сути она за счет нее СНИЖАЕТ шумность с минимальными потерями на скорость потока, но не о какой прибавке там производитель не говорил =)… ZARA, италия помоему

in general, I will summarize for those I read to the end, this shnyak in the tuned exhaust system is like a pimple on the model's skin ... well, it will interfere ... this garbage will create resonant vibrations and the entire factory setting goes through the forest ... IMHO and AFAIK

competently.thanks

maxyrius

well standing wave ... heze. I know the resonant one, that's why the spiders weld at certain revolutions set, this is when the shock wave from the exhaust valve reaches the expansion of the pipe (narrowing) and a vacuum is created near the valve at that moment, if at this time the valve is opened, then the working out will simply suck like a vacuum cleaner! but it works at certain speeds and at a certain distance from the exhaust valve ... blah blah blah ...
... and this shnyaga is easy to check, take a hollow pipe blow into it, well, what is the strength, and blow into the same pipe with such shnyaga ... I think it will be everything is clear =) ... though the lungs are not enough alas =).

тут какой то хитрый принцип утрамбовать поток и разогнать его посильней… но на это нада тоже затратить энергию…а откуда ей взяться то? снова от мотора, получится что то что мы выигрываем мы тратим на закручивание воздушного потока 0_о… не изобрели еще вечного двигателя — из нечего энергию получать.

кстати если это так гениально и просто, что то не заметно что производители начали во всю эти турбинки ставить…хотя не ! вру у меня в резонаторе такая шняга была, ну не такая, там просто выштамповка завехрения в трубе, по сути она за счет нее СНИЖАЕТ шумность с минимальными потерями на скорость потока, но не о какой прибавке там производитель не говорил =)… ZARA, италия помоему

in general, I will summarize for those I read to the end, this shnyak in the tuned exhaust system is like a pimple on the model's skin ... well, it will interfere ... this garbage will create resonant vibrations and the entire factory setting goes through the forest ... IMHO and AFAIK

Right!

It is from such weaklings that smart-ass clever men cut money. :)

It is sensibly said, I somehow understand this poorly, practice will show! )

well standing wave ... heze. I know the resonant one, that's why the spiders weld at certain revolutions set, this is when the shock wave from the exhaust valve reaches the expansion of the pipe (narrowing) and a vacuum is created near the valve at that moment, if at this time the valve is opened, then the working out will simply suck like a vacuum cleaner! but it works at certain speeds and at a certain distance from the exhaust valve ... blah blah blah ...
... and this shnyaga is easy to check, take a hollow pipe blow into it, well, what is the strength, and blow into the same pipe with such shnyaga ... I think it will be everything is clear =) ... though the lungs are not enough alas =).

there is some cunning principle to tamp the flow and disperse it more strongly ... but this also needs to be expended energy ... but where does it come from? again from the motor, it turns out that what we win we spend on twisting the air flow 0_o ... we have not yet invented a perpetual motion machine - from nothing to get energy.

by the way, if it is so ingenious and simple, it is not noticeable that the manufacturers have begun to put these turbines in all these ... although not! I’m lying in my resonator there was such a shnyaga, well, not like that, there is just a stamping of a mark in the pipe, in fact, due to it, it REDUCES the noise with minimal losses on the flow rate, but the manufacturer did not talk about any increase there =) ... ZARA, Italy to my mind

in general, I will summarize for those I read to the end, this shnyak in the tuned exhaust system is like a pimple on the model's skin ... well, it will interfere ... this garbage will create resonant vibrations and the entire factory setting goes through the forest ... IMHO and AFAIK

To be put in the glushak after the "pants" creates, as they say, some kind of standing wave! ))

this garbage is comparable to a plug at the inlet =), at high rpm it will strangle your engine ... another nonsense from the section "hang a vacuum cleaner on the inlet"

And one and the other - it happens, but rarely! Energy does not come from anywhere and does not go anywhere, but simply flows from one state to another!
For example, the principle of increasing power and reducing fuel consumption is implemented in a turbocharged internal combustion engine or in an internal combustion engine with a stratified fuel-air mixture (AUDI FSI)

Misha, hello!) I really can't understand the principle of operation :) If you put it after the pants, the back pressure will increase (it will prevent the removal of exhaust gases) ... accordingly, it will prevent the free full filling of the combustion chamber and due to this MAY reduce the consumption of benzene :) BUT here's how else and increase the power at the same time ?!)

No, it's just interesting, I used a similar thing at one time, it really worked! check it out within a month we'll see! =)

Misha, are they making you a commercial offer?) Cool :) we will all go turbocharged :)

Priveddd, right now, all the docks and the commercial offer are being prepared! I'll throw it off, for me it's a dark forest)))

I would like to understand how this
pribluda works :)

At first I thought it was a turbine from a jet plane :)
I think, and how they will put it in the car :)

In general, about this kind of crap is just on the jet engines of aircraft, the engineer from Chkalovsky immediately said about the standing wave and explained the principle. I will post a video the other day. =)

Americans suffer such garbage. they have it under the name turbanator. by the turbulence of the air, everything is ... they say a scam)))

Oy.togda sorry)) I hope everyone will get)))) I, too, such amerikosov nareznaya.tolko the intake ... www.turbonator.com/ I read it all for otema money from the population))) although it may be in the coupe will work))

No, after the trousers in the backwoods, for each car individually.

54RUS

judging by the described forced exhaust exhaust
type analogue forward flow

only this little thing is put on the inlet before the filter. it seems ...

The swirls create a so-called standing wave, but its effect is still in question! )

judging by the described forced exhaust exhaust
type analogue forward flow

maxyrius wrote correctly.

It actually works! But in strictly defined modes!

And in general, this is more in relation to atmomobiles, tk. more vacuum is created on the turbo and the mixture is pumped under pressure.

That's right - the fuel is crushed into smaller components, which leads to better homogenization of the mixture, more complete mixing with air, more complete and better combustion and, as a result (on a general scale), a greater engine efficiency - here both economy and power - I will not say about percentages. This is a theoretical approach to improving the air-fuel mixture. To put it simply, the injectors in the engines of our cars do about the same when compared with the carburetors of old cars. An internal combustion engine with injectors has higher power and higher efficiency.

It's not about pressure! Everyone knows that when the trigger is pressed to the floor, up to 25% of the fuel flies into the pipe, catalysts, flame arresters, and a standing wave hits it in the cylinder into dust, i.e. you don't need to press to the floor! I will put myself and describe it specifically! =)

While everything works! =)

How are the tests going?

that means ... you are ready to say ...)
why are you silent? .. * rhyme to whisper turned out *

there seems to be 2 pieces ready for me

Are there any other cars?

miracles)

It does not work at all on 2 strokes!

I also found
that this canoe is used more on 2-stroke engines. Do you have a 2-stroke? =)

:-) It's hard for us, HumAnitarians, to keep track of the technical train of thought :-(
One Fkuril tight - a standing wave is ICE!!!

the principle seems to be based on some kind of combination with carbon ... in the end I didn't set myself ...)
somehow the wave created by this thing does something with the combination of the mixture and oil ... I'm not special in this business ... they have been pushing this thing for a long time already, and many refuse after a while, there should be infa on the internet. ... ...

And how is this stray connected with oil and even more with its consumption? 0_o

Yes, I always have doubts about such things, oil consumption increased with use. the principle seems to be based on some kind of combination with carbon ... in the end I didn't set myself ...)

Well, how did it show itself in the end?

I also don’t believe in any such pribluda, and it’s good if the person who fell for this car does not ditch ...

how are the results?
quite a long time has passed - 1 year and 8 months.
helped to save? did this pribluda pay for itself? =)

Heh) laughed))

And over time, with the help of it, your car will be able to move on vodka and milk ...