smarter in Russian) — logbook Toyota Sprinter Trueno, 1997
actually zae ** l me a standard brain to the root, vvt does not rob, failures, incomprehensible mistakes, in short, he asks for retirement, decided not to reinvent the wheel and go to January 5.1-61 block.
what is needed for this:
1. ECU January 5.1-61 (already bought 2500r)
2. wiring for it (it was just released, the sidekick TAZ was transplanted to jack 16, I got the old wiring)
3. KXX to do, that is, cut the standard throttle, (I also got it along with the throttle after the swap)
4. make a knee pulley under the DPKV (I got the pulley from the vase, well, you already know where from))))
5. remake the regular TPS for the VAZ wiring
6. finish the DBP or buy a new one (500 r )
7. attach DTV.
8. Well, every little thing like electrical tape, TAZ sensors. soda and heaps of nerves spent on pinout wiring))
And what is expected as an income? Ability to cut and sew? Or are there other benefits?
tailoring to sew (January holds 2 firmware at once) leaving the fucking distributor system, and the subsequent potential that the standard brain does not give (it is not sewn at all)
I saw this hachiroka, I even took the number to copy engineering ideas, but even he named something valuable for how much they did it to him!
and this, what kind of DBP for 500 rubles?
It’s ok…January is the most adaptable and versatile brain hee hee 8)
Andryukha was also set up for Hachiroku in January – Vanka Reis did…
about dad - I mean that it costs 1,000 rubles in retail ... I had the same one, roofing felts from "MonoNiva" roofing felts "GAZ-some" HZ ... I don't remember. By the way, it's still in the garage...
Yes, there is a long-term construction and almost all the main work was done by specialists in different directions. Rimbaud — body + exhaust + frame set (bolted). Igorekha "Remont93" rocked the rack. VankaReis - brains, wiring, program.
He bought almost everything new and branded, all sorts of auctions and so on.
The wheelbarrow was quite "drushlak" - vegetable.
I myself have not yet ridden a wheelbarrow ... the effect obtained by HZ ...
Well, he says that he is going sideways, but he told me that in January he got 60 thousand! I will transplant mine for 10 thousand in the worst case scenario, when I have to buy a new pulley with teeth for 4 thousand in January.
I'm also moving to January, good luck with the project. Soon I will post a photo of the installation of sensors in my journal. No time to take pictures yet.
Strange though — DBP for 500. I have a GM — it costs 2500 new … + Air temperature sensor.