Embroidery or embossing? — Toyota Soarer, 4.0 liter, 1986

Well, it's clearer now. I never would have thought this would happen. How much progress has been made :)

updated text a bit :)

I join the question. For collective farmers, too, it would not hurt to put it in a simpler way :) ) )

and for ordinary guys from the outskirts, can you decipher what embossing is?)

Not yet. I looked at the V8 … at the Griffin … I decided to stop only at the Griffin. It's superfluous - V8 on the back is embossed.

Embosser is a device designed to personalize plastic cards by mechanically extruding (embossing) identification information on them in manual or automatic mode.

Mechanical embossers are a press that is capable of squeezing out pre-installed letters (usually Latin letters and numbers) on a piece of plastic that are installed on a special drum. It is mainly used for small runs of plastic cards, when it is not economically efficient to use high-performance automated lines.

Automatic embossers are a complex technical complex that includes a micro-computer that controls a drum with a set of characters through which images are squeezed out on plastic cards. The performance of such devices can reach several hundred personalizations per hour. "(c) Wikipedia

It seems to me that you need to make embossing both v8 and griffin :)
do you have a sketch?

+ for the griffin

picking it off - it's not a hindrance :))))

we are waiting for a full painting ... well, I told you that something else is pulling for itself :) )

if the fasteners are through the holes, then first find what you should have there. Well, if it’s glue… then it’s sad… you can try it carefully with a hair dryer at the lowest temperature.

well ... you have to try ... and then I’ll tear the hell out of this glue ... like on the doors these tapes are blunt, under them the glue is just infernal

Al-exe

but I didn’t say anything about chairs at all ... I know that it doesn’t look good ... yes, he even sits there so tightly

no one has yet canceled a knife or a minus screwdriver :)))))
but you most likely actually sit in holes.

You may have it on clips. holes will then be 2 in the trunk. Not all Toyotas seem to have this kind of crap. so I can't say for sure.

but I didn’t say anything about chairs at all ... I know that it doesn’t look good ... yes, he even sits there so tightly

no, on V8 seats it’s superfluous. it would be necessary to stopar come up with something like "4.0 GT Limited".
… and you, by the way, take the fucking Toyota badge off the trunk, it doesn’t look good.

V8 in the back, griffin in the front
or so TURBO DIESEL in the back and get it from the same opera in the front :) ) )

thanks for the decryption.

I am for embossing, I saw how it looks live, it is more interesting than embroidery.
and only a griffin, v8 seems to me to be superfluous.

+1 for embossing

with respect to the V8, the idea of ​​"quietly descending the mountain and covering the whole herd" is somehow closer to me. so, let's not brag about it. Now I just want a Griffin embossed and that's it.

For practical reasons - embossing with griffin.
But for myself, I would just do V8 :)

this is if you have a supra — then you have to do everything so that it sticks out in the style of "how I'm going to pile on everyone!". Soarer ... it's "quietly go down the mountain" :)))))

here on the occasion "quietly go down the mountain and cover the whole herd" I had the idea to weld the manifold under the turbo so that it stood on top. and with the hood open, it seemed to say "HERE I AM TURBAN! :)", and a friend started to put the turban down on the contrary ... so that it was not very visible ... and just cover the whole herd) ... from that moment I had doubts. Or maybe you really need to push it down? :)

+1 for griffin, embossed. No V8 is needed, it will be superfluous, let it be a little secret. And whoever needs it will understand by the sound what is under your hood)) By the way, I have a Griffin in a vector, I can share it!)