Interior lighting - Toyota Carina E, 1.6 liter, 1993
I made backlighting on the bottom of the doors with an LED strip in the summer, at the feet early from neon tubes (I don’t know what they are called correctly), but only the front, the back are already cold, but I’ll do it later
No, they are installed without drilling, but the fastening is unsuccessful, all the socks on the shoes are erased (
How did you attach the pedal pads? Drilled? :) And the backlight turned out pretty!
Then take the minus from the body, and the plus from any light bulb in the illumination, for example, from the backlight of the cigarette lighter or stove
I want to make the backlight in the legs from the dimensions, how to connect to them? you turn on the dimensions and with them the backlight in the legs lights up
You take the minus from the limit switch - you remove the middle pillar trim and, together with the limit switch plug, put in a thin wire (I took thin ones for wiring the backlight), plus you take it from the fuse box under your feet, you also put the positive together with the front, just don’t confuse the wire with which leg to shove, so that the current goes before the turn, and not in a straight line, you choose the one through which the current flows without ignition
Why did you hook up the backlight of the legs? + -
I don’t understand electrics well