Fuel system flushing — logbook Toyota Allex 2001
Hello!
So finally something happened that I thought about for a long time, today I washed the nozzles, the throttle valve and changed the candles along the way.
It all started with the fact that I read a lot of information about how flushing affects work and what harm can be from such a situation, I doubted whether it was worth it or not, but then a friend from Novosibirsk arrived with the same engine and told where and how he got it us in the city washed his fuel system.
Heeding his advice and calling the service station at 8.30 am, an appointment was made. At night, as an evil, the frost was -37 degrees, in the morning I thought that there would be problems, but no, Vimes started up and we went to the service station.
Describe how he was driving, etc. I won’t, I’ll move on to the main thing, when we got to the nozzles and washed them with ultrasound, it turned out that the sealing ring did not hold on one nozzle, it was immediately replaced, after washing, I saw on the stand how clean nozzles work, there was enough dirt on them, because to. in the bath where the nozzles were washed, a lot of black grains appeared.
After washing the nozzles, it came to the damper, that's where the dirt was, apparently no one climbed here before me, everything was successfully washed and cleaned of dirt and soot.
Along the way, candles were replaced, on the advice of a specialist.
Conclusion, after all the operations were done and I went after 5 hours of being in the service station, the engine began to behave extremely agile, sharp failures during acceleration were gone, the momentum was gaining smoothly!
I apologize for the quality of the photos, I only had my phone at hand.
In general, I recommend everyone to flush your fuel system!
Issue price: 2 000 ₽ Mileage: 121�500 km
yakov
:) they have something new, but our old women need to be protected =)
everything is correct)
yakov
hello :)
well, what can you do =)
although it pins me more on my puzoterka than on a left-handed jeep :)
Puzoterke, go to my today's BZ and say again who has a puzoterka there =)
Well, we have a little easier with this, if everything goes well, then at the end of March, at the beginning of April, there is usually no snow anymore :)
hello :)
well, what can you do =)
although it pins me more on my puzoterka than on a left-handed jeep :)
yes…
I drive every day, except for frosts…
but I try to ride this one as little as possible on a bespont, if there is an option, for example, to roll up to a store, then on a batena and stuff like that :)
they have a new fig, 2500 on the odometer, another run didn't work, so I'm here to help =)
Well, he bought it in order to use it hard :) How much do you drive your rocket a day approximately and do you ride every day?
I don't travel much either, but a friend in Nske every day for work and around the city travels 23 tussies a year on his fielder.
In order to drive 35-40 thousand km, I need to drive for 5 years if not more, I dashed 15 thousand on the previous one in 1.5 years)
yakov
well done. this should be done, I think once every 2 years.
I also washed everything for myself, and the tank was removed and washed + all fuel filters
Hey! Happy New Year! As for the removal of the tank and washing the filters, this will also be all but closer to March, when it becomes warmer.
In general, they advised me to flush every 35, 40 thousand km, but I think with our gasoline it can be more often :)
Ahh hello! =) Thank you and Happy New Year to you)
Before that she flew, but I drove it myself at the wheel) and after washing I can’t imagine how she went at all)
ankind
I can’t imagine how she fell down after washing) and so go ahead, God forbid!)
Hey! Happy New Year! With Yakov, she didn’t just bring down, she probably started to fly :)
They measured it for me for free!
Don't drive the fool! Am I really a beggar or something?)
I’ll measure it somehow
how much did you pay for it?
I paid 100 rubles, you can measure it for another hundred for the sake of interest ...
I’ll even send you 100 rubles =) )
although Lech says, your condition is better, the engine runs much quieter and the mileage is 2 times less ...
It is necessary to take the people and go then)
Compression does not play a lot of role, in general, the device may be junk or something)
Damn, I don’t remember ... in the crowd, if it’s not enough, but one at a time, 2 or 3 thousand hours, and it takes about 40 minutes if it’s less with the settings.
you have more compression
I think we’ll check it, only I hope there won’t be a hard strech on them, otherwise it’s kind of a pity, although I’ll go to KK for 15, or rather I’ll take them with me =)
No, well, then we rode everything exactly more cheerfully! )
Were you going to the booth? how much do you say it costs, forgot something, ?
Yes, it’s going well, I think it’s not better than yours, and if it’s better, then quite a bit because of all the little things, in the summer if I install everything, then yes, it might be better :)
let's see, we can check it once;)
well done. this should be done, I think once every 2 years.
I also washed everything for myself, and the tank was removed and washed + all fuel filters
When will I get to this? I think probably now only in the spring, as finances sing romances)
That's right, when I don't know, I don't climb...
It's better to go to a trusted specialist...
Do you have anyone in mind?
Yes, this is understandable, I didn’t even think of doing it myself, I’m generally a supporter of a professional approach to the car, if I don’t know the intricacies, I won’t climb.
It is necessary to give a specialist what he would do ...
You don’t need to do it yourself ...
This is true, I read about many cases when, after such a procedure, the dviglos got up with a stake, I would not want to get this :(
I haven’t heard about not taking it off, but it seems to me that it’s okay to rinse everything just the same when taking it off at the stand :)
I'm closer to changing the oil in the engine, I still want to do a decarbonization
I washed the nozzles in the summer without removing and I don’t remove the throttle valve ...
Now, closer to the summer, I want to wash it off, see the rubber bands and how the nozzles work in general ...