!Shaving!-!Vinyl! — Toyota Cynos, 1.5 liter, 1998
You must be a brave person, or at least have arms growing out of the right places, to immediately decide to wrap the car with vinyl without delay.
I must say that my Cynos was beautiful and got me with a lot of unpleasant kosyachkov - these are dents, scratches, etc. Of course you want to ride beautifully. I think many will agree with this. I chose a somewhat budget option of beauty, although it is fashionable today --> auto wrapping with vinyl. Color-certainly bright WHITE MATTE.
I bought film, squeegees, nozzles and even knives in Wematec (Moscow). A building hair dryer was found by a good friend. Another friend found the time and desire to help me. By the way, he is also a fan of Cynos.
After a simple but painstaking preparation of the body + welding badges (shaving), which we also decided to do ourselves, we started pasting. Today, the car is completely covered with a film, with the exception of bumpers and body kits (more on that later).
Issue price: 10 000 ₽
how much film did it take, what are the difficulties in dismantling the rear badge?
with all the jambs it took 15 meters of film) it should have taken much less) but it's okay, we studied!)
dismantling the badge does not cause difficulties - the procedure is simple) unscrew the badge with a lock, then cut out a square with a grinder, make a patch on this square, weld it and putty, bring the whole thing to zero and two layers of soil on top (primary-finish) ... everything seems to be simple )
The beauty! Hands grow from where)
When pasting all the glass is removed? or the film just gets under the moldings?
gently (as far as possible) starts up, cuts off somewhere) the glass was not touched)
I correctly understood that the car was originally white, but skewed white. did you just update the color and make it matte? The machine looks like new. class))
and I only dream of vinyl. I have a lot of ideas, I haven't decided how to implement them yet))
yes, the color of the car was originally BLACK WHITE) vinyl is an excellent way out for those who want to update the appearance of the car on a budget, or, as an option, add personality to it)
Now the machine looks almost like new)
as for ideas and incarnations) I think it will be possible to help;) please contact.
Thank you very much. I have long wanted to tighten myself in a black hood, roof and trunk. At what room temperature did you pull?
thank you, nice) although it seems to me that after all "the first pancake is lumpy")
below is a link to film suppliers) as far as I know, most vinyl masters in Moscow are ware there) though more expensive films like Oracal are taken elsewhere.
www.wematec.ru/
I also have a place. Let's look at the directness of my hands) If it doesn't work out on my own, then I'll contact you.
The temperature must be at least 15 degrees! if you need help, please contact - there is a place and hands in Moscow, quality and guarantee;)
probably my omission, it was necessary to make a detailed report separately on shaving) they often ask)
in general, you remove the badge, the stiffening ribs of the badge remain (as far as I remember), you should not touch them, then from plastic, in my case it was a fragment of a bumper from an Opel, cut out an oval patch to fit the hole for the badge; then you weld this patch with a soldering iron in place of the badge, then the stage of straightening and applying putty ... you can find out what putty was in the chapters about the front bumper, the process of plastic welding is described there (short and clear).