Noise NO! Part last! — Toyota Avensis, 1.8 liter, 2008
Hooray, I got to the computer to write a long-awaited post about the work done with my typewriter for the New Year holidays!
first of all, I rustled the doors www.drive2.ru/cars/toyota…/288230376151743779/#post
and the ceiling, trunk and hood www.drive2.ru/cars/toyota…/288230376151745916/#post
having opened the floor covering, it became clear that there was no point in gluing the floor as well, because. there is velor, soundproofing material and in some places there is even a vibroplast! but in some places this is enough with the head to say NO to the Shumka floor =)) because. The process is long and tedious!
so I moved on to the last stage - soundproofing the arched space!
I started with the rear wheels, there is some kind of nonsense instead of lockers. similar to a thick fabric (I didn’t quite understand why it was there instead of plastic) ...
first of all, I washed off all the dirt that was under the fabric, dried it, degreased it and glued all the metal with a vibroplast joint to joint!
then moved on to parsing the front arches!
I took off the plastic locker and again washed it thoroughly and degreased it, glued it with vibroplast as I saw fit =)
I also glued a couple of pieces of vibroplast onto the body, the rest of the front arches were treated at the TOYOTA factory with vibration-isolating mastic, for which many thanks to them =)
splenitis stuck only on the rear arches from the inside of the cabin, but I forgot to take a picture of the finished result, there is only when I took it apart = (
but believe me, I honestly glued the arches with splenitis =)))
now I’ll share my impressions of driving after the noise of the arches — now you can’t hear how the snow is beating into my cabin, how stones are flying into the lockers, how I drive through puddles and water spurts on the car … if only they douse me from the side, then I will hear something like — boom, not khrenaks on metal with a spoon as it was before =)
in general I advise everyone to make Shumkov, preferably by yourself, because. you see and know what and where and how it’s done… not one service will do what you need!
Thank you all for your attention and good luck in improving your driving conditions =)
Issue price: 1 000 ₽the necessary weight by the way =))) sometimes it would not hurt me =) and I would also have a saliva collector when a Porsche 911 or a Chevrolet Camaro passes by =) the cars are beautiful, but I will never buy because of their practicality = ((((
and also a branded shtatovsky lip-roller and it would be finally all in chocolate)))
exactly =) but by the way, it’s also not sweet to ride in Q7 after my own ... I would also like to put an air suspension like in Audi and my fifth point would not know more happiness than riding an Avik =)
Thanks! silence and calmness, pits fly somewhere under me, a slight swaying of the body of the car and life is beautiful =) but as soon as I get into someone else's car, out of habit, my ears begin to pawn like in an airplane ... this is especially evident in cars of the Kia and Lada brands ... no one no offense =)
Thanks! I didn’t get about half a year, but then the holidays came and it was decided to spend one day on myself =)) I didn’t spend a lot of material, but the effect was noticeable in combination with the previous work on noise reduction!
I’m getting ready sooooo peculiarly, I want to order more covers and a car enthusiast’s suitcase tomorrow I’ll buy from keys and screwdrivers =) in the BBC I found what my soul needs =)
now I’ll buy what I want for myself and cars, otherwise the family budget will be scheduled for the most necessary =)
Thanks for the compliment =)
I see you are preparing for the main event in a very peculiar way =) Handsome as always, hands grow from the right place)
Toyota made vibroplast there somewhere … and I stuck splenitis on the arches! so I removed the main noise ... but what's the point of sculpting another vibroplast and splenitis in the trunk when I don't have a subwoofer?
well done :) I looked at the photo of the trunk and immediately remembered my own :) the same without noise :) noted;)
nothing is needed there ... straight arms, some material ... and any garage with a heater =)
now my car looks like a car. when you go in it =) you can’t compare with stock at all …
Thank you =) taking into account the fact that absolutely everything is noisy now in the car ... now it’s really quiet =) I didn’t touch the floor, because. toyotovtsy did everything for me =)
pancake at all a real theme! there and so there was nothing inaudible before, but now it’s probably like being at home on the couch! RESPECT to you for the work done, without gingerbread did not pass by)))))
but I never competed … the engine is weak for such a machine … 129 hp she misses...
and only 40-50 kg added ... this is nonsense ... the main thing is comfort =) remembering the stock, there was still that rattle =)
Damn it's cool for you :) ) but now the machine has also added a lot of weight : ) ) it's harder to compete with someone now :) )
I think from 16kl. dvenakhoy (chip.) she still can compete even with 129l.s. and with such a weight ... good luck to you on the roads too) )
I have audyuha 131l.s. it’s true that the Germans are probably lying there, they have a 20 valve and a 2-liter volume, it also weighs somewhere around 1.5 tons, but it piles up robustly, any Russian auto industry is not nearby, but it’s somehow strange in the evening, especially in the summer when you go for a ride, everyone hates to start with you) ) ) but after one start I turn off somewhere in the other direction without even having time to turn on the second gear, but the priors endure up to the third) ) )
so 129 hp from the Japanese, these are not Russian horses) ) )
Yes Nitsche =) at all acquisitive-simple in my journal, I see in the meeting room, in yours I see only if you pressed the answer button! Otherwise, I'm sitting and stupid =)
clear! ! ! thanks for the guidance! ! ! ! ! Damn, I forgot again ... but the message cannot be deleted after it has been written, only edited?
Thank you =) now in general the puddle class passed and you can’t hear how they hit the lockers and rear arches, when you hit the stones in the snow or touch the stones, it’s also silence ... the only thing you hear is if you catch a baaal big stone, there will be a dull sound-boom somewhere below cars =) but you won’t understand where =) I didn’t regret that I spent 6-8 hours on this work ... it’s just that the wheels need to be removed, the arches should be washed from dirt + I also washed the lockers at home =)
yes, and in winter it’s bad to glue in an unheated garage - you have to warm up each piece for a long time with a hairdryer ... but you can’t glue it as a whole, from the mb lift and maybe, but I have a jack =)
Dimon, you're just a beast))) Here's respect and respect for you! How does he ride now?
there is no noise from the snow, it attacked 20 cm during the day and began to tap a little on the rapids =))) and when you go through puddles or there is snow, but in reasonable quantities, it’s generally quiet =)
dense crap to the touch of the type of fabric even, but sooo dense! taped the outside with a vibrator, and from the inside with splenitis … and in front everything is glued from the inside, I just added it from the outside! =)
it is necessary from the side of the salon to cover the arches, floor, thresholds and more splenom from above! must stop!
But how are they covered with fabric material? What about water and salt and dirt?
the vibric is closed on the front arches with a plastic locker, which I pasted over, and on the rear ones with a thick fabric material ... it doesn’t get sandblasted ... the front arches are partially processed from the factory ...
now there is a sound from snow falling on the thresholds in the front of the car =) now I think what to glue next =)
Dim! cool done! I also dream! but my car is treated with push fat. which I will never wash in order to stick material on the inside of the arches!
and the vibromaterial is covered with plastic or is it always under sandblasting?
well, yes, you can live =) but I glue everything that is possible at home ... if you don’t bring it home, then in the garage = (
Thank you =) the garage is not warm, it is + -4 degrees, depending on how much it is outside ... I drove a car, drove into the garage and turned on the heater - after 30 minutes you can work =)
where did you find a warm garage ...))) in general, I
did a sensible thing,
I am once again convinced that your hands are growing from that place!))))
I often drive on Q7, like Shumka is cool, but after my Toyota-Shumka beeeee =) not as an advertisement for Toyota, but simply that Shumka stock cannot be better than an additional 100%
Went here recently on the LS460! This is certainly cool, that's where the Shumka is on top!