The first hurdle has been taken! — Toyota Celica, 1.8 liter, 2003
I can assume that today it has become a machine, the second time)
Welded, stretched and waiting to continue! All in the gaps - a beauty!
Well, I had to cook a full quarter. Cut spars on the floor, cup and license plate. Yes, yes, I know, I know that cutting the license plate is not good! But I do not care! ))
The doors close from a light swing, almost silently, no worse than in a Lexus))
There is one drawback, the crooked hands of the previous masters. Type straightened front left fender and the same rear near the door. Well, they are not correct roundness and convexity)) We'll fix the front, but you have to spend a lot of time on the back, but I can't wait anymore. )) If you look closely now, then on the left side the door seems to be a little melted. It remains to straighten the ass on the right bun)))))
Lyrical digression.
Since the engine was removed, it was possible to inspect it from all sides. Thanks to my friend and former owner of this machine for an excellent engine capitalku. No drips, no drips, no sweat.
Well, everything can’t be fine))
Now I can’t get through to the disassembly to pick up the wing and cilia ... tomorrow I’ll be a telephone operator)))
Well, according to my tradition, what is left to buy:
1. Windshield — 70 USD;
2. Wing - 100 USD;
3. Block xenon? not yet decided)
4. Paint and varnish - paint - 125 USD, varnish - 75;
5. Hood hinges and lock - $55
Total: $425
To date, the amount of costs is:
1. Subframe - 400 USD;
2. Hood - $200;
3. Rear beam and rear right lever - $ 150;
4. Front right lever — $80;
5. TV and cilia - 100 USD;
6. Quarter - 150 USD;
7. Shruz, front bumper with fogs and headlights with correctors - 200 USD
8. Work - 800 USD
Total: 2080 c.u.
Approximate budget $2500
And the cost of the car is 5000
These are pies, pies and pies)))
Mileage: 120.000 km
PPC, even if it's 40 rubles per dollar,
then it's 100 + 200 :)
300 rubles for a car :)
You just need to hear it 1 time :) and that's it :)
That's why I don't want to sell the mafon :) if I will only when I get bored and then at least 25 thousand :)
:))) mine reads only dvd discs :) not a CD, not even a flash drive :)
But the quality of the PPC is what it gives, 800 settings, and the most important thing is when to be sure :)
I worked professionally in audio installation and for me loss of music is an important thing :)
We don't even have those prices! Lately, we’ve been watching a lot of cars, half of them are owned by hucksters and they’re stupidly sold ... and the cars really hold on to snot and they want 12500 for them
. this is a case of foam)) It was a shock ... at the same time, the person piously swears that only the trunk dampers need to be changed in the car and that only the left wing was scratched)))
Oh, I still have music! Although at first there is something to throw
We have a ready-made version with such a year and mileage (plus dopas such as loops, stoics and fresh painting) costs about 14-15 thousand USD.
Well, at the end, another 500 USD. straightener)) In general, by eye, the maximum budget is about 8.500 USD.
Well, quite a normal budget, especially when you consider that they make a car for money. the ready-made version is usually more expensive.
Well, how to say not cheap)) Considering that the whole one costs from 12500 - 14000 USD. - this is 2000-2001 up to 19000 c.u. This is 2004, 2005. 23 throughout Ukraine they sell at most 10-12 pieces of which, in the best case, 2-3 have not yet been stolen!
And the car of a friend ... the insurance company estimated it at 5 thousand and put it up for auction, but didn’t want to give it to the hucksters, so they paid for this amount.
Yes, not a cheap repair, but why is the car so cheap for only 5000? do you have a lot of cars?
ah well, then it’s understandable)))) well, good luck in restoring the car, otherwise it’s a pity for such a handsome man.
Yes) You still need to assemble all the insides back and paint the engine compartment)
xs what kind of company, I don’t remember the name, in the evening I’ll throw off the site address, it’s
made with high quality and the main thing is working properly))
))) In general, let everything go on as usual)
I agree)))
Tell me about the start button, what kind of company?)))