Replacement backlight controls heater and air conditioning

No longer...😞

in the case of krutilki do not bother where their lenses are

Terral

why? if we are to change, then the diodes!

Diodes also have different, spot with lens

OK

If not difficult, to install take pictures with the size of the cap against the ruler.

starter163

Recently I read Shavarik post about diodes www.drive2.ru/l/7530836/

while waiting for the process of installation lay out

I agree that the main diode to pick up the ambient light to the point of no stars.

Yes, there is in fact 2 times soldering iron tyknut a light bulb for a diode with restroom to replace... ))

Recently I read Shavarik post about diodes www.drive2.ru/l/7530836/

DobryiShmell

Here are the names of the bulbs to find out...

why? if we are to change, then the diodes!

In principle, any mobile shop should be.

starter163

They write that the base of T4.2 kiev.kv.besplatka.ua/uplo...16/38/1EIbZcTiLY94Bz1.jpg
No, not lit d-a.d-cd.net/4eadafcs-960.jpg
Here are the diodes b-a.d-cd.net/4c18282s-960.jpg

where to buy these
diodes b-a.d-cd.net/4c18282s-960.jpg

OK, let's wait.

Thank You, Sergei! I looked at the post below, sign will look like will Shine can also order

They write that the base of T4.2 kiev.kv.besplatka.ua/uplo...16/38/1EIbZcTiLY94Bz1.jpg
No, not lit d-a.d-cd.net/4eadafcs-960.jpg
Here are the diodes b-a.d-cd.net/4c18282s-960.jpg

The store will not understand me))) took the diodes, did not fit... the Way button is highlighted mirror adjustment?

What you got — HEATER CONTROL BULB, W/CAP, 1.8 W

Here are the names of the bulbs to find out...

But not for that.

bookmarked, too, need to change. Thank you.

Thank you! You too.

No questions)
Good luck on the road)

Totally agree, but I have a stock of these bulbs when the handles changed b-a.d-cd.net/a4a094as-960.jpg

they are also prohibitively expensive) For me it is cheaper to take a 3mm diodes 5P. thing and to forget about replacing light bulbs) (not talking from the bulldozer, did so-so)
Well, for myself of course +

Well, if I have something to do with them, then gash diode scattering.

The most offensive that they are unreasonably expensive, I like Honda they still burn out frequently.)

Well of course it is easier to pick up, but you need to consider that it is 1.8 W.

in chip & dip very light worth 10p/piece
www.chipdip.ru/product/h39-12005/

unbend from the bulb legs are removed from the cartridge, remove the cap this color, and assemble ye on the new, he changed so 12 blown bulbs in the cabin)

clear)

What? as the light bulbs?)
I have not changed, only showed how it's done. Well if You are so interested, here g-a.d-cd.net/3ea094as-960.jpg

and the result where?

Well, I wrote in the text that these whirlings, for example, from Axiom, and the Corolla yellow)

yeah as glow light bulbs! the most important thing is broken( you put the green and what red burn(

Morkoffka4X4

The led die only way to go

the LEDs are dying:
— excess current over the maximum allowed. Ketaytsy in their crafts led is doing at the time
— excess of temperature over the maximum allowed. Such garbage as cooling, catici, very often, do not bother vaasche. A typical example is the DRL lights. A dead, barely-luminous or flashing, I think I saw everything.

Morality? Do not exceed predelnye currents and temperature limits, and you will be happy. And the LEDs will outlast the car.

If power surges not all the rules!

short circuit

I had the led's to implant to solve the issue once and for all

The led die only way to go

I wrote the manual, the lamp I have whole)

I had the led's to implant to solve the issue once and for all

Well, such is their policy.

21 in the yard and they all light bulbs shoved everywhere from the factory, misery.

UrbanVibes

I can say one thing!
If there are normal bulbs — you need to put the usual, and the color change caps, the Koito juicy from yellow to purple in the range. They are from T2 to T10 of the cap.
Diodes with resicom tends to bask in a confined space if they are Smd, and also can popraviti socle, and those which give a bad Led light often.

Everyone will decide what to do. I gave the room light bulb, because it is a factory thing.

still have the led light beam other then the uneven lighting

I can say one thing!
If there are normal bulbs — you need to put the usual, and the color change caps, the Koito juicy from yellow to purple in the range. They are from T2 to T10 of the cap.
Diodes with resicom tends to bask in a confined space if they are Smd, and also can popraviti socle, and those which give a bad Led light often.

sharapov1990

"Infamous" they say only those who have it in the operation failed for a number of reasons many that who and what independent, but with proper maintenance, everything is fine except for the instances to manufacturing defects.

Ie At work need to go by certain rules? As prisoners in the area? But all travel on normal machines so I understand you correctly?

Never had Affairs with him, but many friends have had the experience and that is sad.

starter163

The trouble is that he corestyle was only with the infamous box-robot.

"Infamous" they say only those who have it in the operation failed for a number of reasons many that who and what independent, but with proper maintenance, everything is fine except for the instances to manufacturing defects.

But on the restayl could have the climate of not having the robot)

Hmm -sorry of course

The trouble is that he corestyle was only with the infamous box-robot.

Looked-the climate of course more beautiful))

But mechanical, reliable. On models with a climate this panel looks like this static.baza.farpost.ru/v/1430195097059_bulletin

Strangely on such a beautiful car-this ancient whirlings

Yes, you can always find what to replace.

Such good prices on these bulbs. Basically, on my about the same. One pleases — I know a shop where these bulbs are sold for the price of 6 rubles/piece. :DD
Caps 2-3 rubles, do not remember. Right now, konesh MB are expensive. Eight rubles. :D
However, they have no ammo to go... But to remove the old lamp cartridge and shove a new problem is not. )

This is the original handles, only in the new Corolla.

than the original and not staged, unlike the copies

Of course.

And the lamp is removable? they can be changed to led?

Thank you!

A good idea 5+

I parent this procedure on the touch did! plus I razbira all the whirlings, all privce latch. The hemorrhagic was right to put the Twister temperatures, because they do not know about labels, Vistula eyes, collected, twisted, disassembled and rearranged

Someone that wants something and puts, and I only wrote the manual for replacement. At not changed.

And diodes not the fate to change?

All thanks changed.

To remove the block, otselot the cable and change the lamp.

I burned the lamp of the direction of air flow! To replace it need to disassemble this unit?

Corolla Е150.

what year is the Rav-4?And do I need to remove the radio?

Thank you talked to him

Only remove the cable, do not need is one lamp. The button in the center illuminates the individual diode.

Okay thank you, and to change this light bulb inside is also necessary to disassemble, or the light which is in the center?

Before removal, always place the arm at extreme positions and everything will be fine. And so all in the article.

Good day! Tell me is there any danger or difficulty the withdrawal of the tropics? From block tropical flipped? Gets back to normal? Need a light bulb replaced and I opened and looked and the wires were afraid to take ouratea suddenly snimatsa. Tell please and pmli there are photos of the tabernacle. Thank you

But not for that.
Of course, the filter is relocated to a new lamp.

All turned out to pull the bulb, thank you. Please tell me when I bought the light bulb is yellow, it is also with rubber band ( yellow) and it is possible to rearrange the gum, green instead of yellow.