? How to paint the bumper standard, and with Elektroraspalitel!
To paint the bumper, not having a good experience is problematic. It is important to have not only a suitable property, but also the tools and the ability to pick up the tone of the paint. To paint plastic bumper You will need to buy specially for plastic primer (primer) and if it's an old bumper, it is also putty for plastic. In addition of course the sander, the circles of the sandpaper and spray gun, although you can do with spray cans, if the quality is not the main goal. When all necessary is available, and you're still going to try to paint the bumper with his own hands, to know about the sequence of actions and the nuances of the procedure will be very necessary. No matter whether it is a local painting or complete painting of plastic bumpers.
π The necessary materials and tools for painting
β degreaser (after each stage of grinding), and best buy, special, for plastic surfaces, as well as a few napkins.
β the plastic primers or as primer (200 grams).
β sandpaper in order to wipe as directed before priming and after priming the bumper before painting (need P180, P220, P500, P800).
β properly configured spray gun, matched the paint (300 grams) and for the final chord of the Polish.Not with a spray can and spray to make all the necessary procedures, but not on the paint of the bumper with a spray can is used only in local areas.
βΌ Remember that getting paint work need to have means of protection, namely, to wear a protective mask and goggles.
Step by step instructions how to paint the bumper βΌ
The first thing you need to determine the type of work performed. That is, to establish the scope of work based on the condition of the bumper. This is a new bumper required or old restore the original appearance, the need to repair the bumper or just start painting? Indeed, depending on the condition and tasks the procedure for painting the bumper will have some changes and differs. But in any case, you need to wash the bumper and treated with degreaser.
π Painting a new bumper
.
1. Fill the sandpaper grit P800 in order to get rid of residues transport of oil from small flaws, and then degrease the part.
2. Priming two-component acrylic primer. Primer bumper is produced in two layers (frequency of applying the next, depending on the drying, it is necessary that the layer becomes Matt). If you are a master in this case it is recommended to buy ready-made soil and not to plant adhering to the required size.
3. Wipe or as they say to wash the ground cloth P500-P800 for the base coat of paint is well stuck to the plastic (often can not wash, just gently wipe the sandpaper dry, and then blown).
4. To blow the compressed air and degrease the surface before applying the base coat of paint.
5.Apply a base and with an interval of 15 minutes, apply another couple of layers of paint.
6. Make sure there are no defects and schools to apply the varnish to give a gloss painted bumper.
To properly paint the bumper need all the robots to produce in a clean, warm room without drafts. Otherwise the dust can you screw it up and no polishing will not do.
π Repair and paint the old bumper
.
A little different from the first case, as also a hundred will need a separate place to process putty for plastic, an additional step is the removal of defects, it is possible the soldering of plastic.
1. Need a good wash detail, and then sandpaper P180 the surface of the wiping layer of paint to the ground.
2. Blown with compressed air, treated antisilicone.
3. The next stage is to align all the irregularities with putty (it is better to use special for plastic parts). After drying, wipe first with sandpaper P180, then inspect for small defects and apply finishing putty, and wipe it with sandpaper P220, in order to obtain a perfectly smooth surface.
Between layers of putty sanded definitely blown and treated with a degreaser.
4. The bumper primer a single component fast drying primer, and not just those areas that have been sanded and applied filler, but the areas with the old paint.
5. Samatvam 500 sandpaper putty after applying two layers.
6. Degrease the surface.
7. Proceed directly to the painting of the bumper.
π Nuances when painting, which should be taken into account
.
.
β’ To get to work only on well washed and clean bumper.
β’ When degreasing bumper use two types of tissues (wet and dry).
β’ If work on the painting made with the bumper of Asian origin, it is necessary to carefully degrease and wipe well.
β’ Do not use a Hairdryer or other heating technique for drying paint.
β’ Working with acrylic varnish you need to follow the instructions, which will be attached to it, so, before to paint the bumper, you need to carefully read the instructions.
Vidosik-
All successful painting)
topsikret
well, it's not for masters.on doorsteps so to speak))
Painting a lot of subtleties and it is no need to rush.the main quality to prepare the item for painting
topsikret
well, it's not for masters.on doorsteps so to speak))
And if dark colours as an example black then depending on the repair and 80 120 240 primer primer acrylic primer after 320 400 500 800 and paint and primer to lay down 3 layers and if the new bumper it just processed super Faena then applied primer is primer and paint is to paint wet on wet but if not then after the ground 320 400 500 800 and dyeing
soland28
So while masters and believe there is so much here so much, and in fact larusso save for which the customer paid
the point therefore they are more bought as where to choose the paint they can get you a bad hiding bad paint that if the paint is bad so it is hiding to hide need not 2 layers as expected and 3 or 4 coats of paint
So while masters and believe there is so much here so much, and in fact larusso save for which the customer paid
Well, about 300 grams don't know. The front I painted a couple of layers less than 200 grams
All true, but only if you paint the metallic coat, then 400 gritt large, will be viewed as a risk, you have to either 500-600 on dry or 800 wet processing
And between 220 sandpaper and 500 should be 320 and 400 so as to bring down the risks.if you paint silver and light colors depends on what kind of repair and so 80 120 240 then primer on plastco acrylic primer after primer with 320 to 400 and paint
Easier glossy in ahuliard. As the floatstone. To produce less, work less, less nuances.
NHK
incidentally the TAGAZ sold cartridges per color www.drive2.ru/l/4022976/
And that, class, TagAZ no, but the cans are! :)))
NHK
incidentally the TAGAZ sold cartridges per color www.drive2.ru/l/4022976/
my present( though with an accent it might fit?
Well, do not want to repeat) with any brand of your color code, and not all brands and not all know what color's what his code) Is on the conscience of managers and sellers themselves)))
Comment has been deleted
I agree-when it can do, some think tell someone the steps and do it myself-never will
Neither one nor the other. Poshkurit his red scotchbrite, walk on plastic primer, then a 2K acrylic primer. Well even if enthusiastic bunch, can security the whole terrain...
If the plastic bumper is textured, should be smooth sandpaper to smooth the surface or use mortar to fill the irregularities, how?
iSavo
Good article, will be very useful soon)
don't try=) need to learn the correct deeds and bad, like in the video it works
Sevilio
Nesterov is a clown pure water!
There is more than half utube the clowns, and some even angry :)))
topsikret
At Yes) View more :"Oleg Nesterov (Brest) in YouTube".It is such things makes that wah
Nesterov is a clown pure water!
Special he may be good-but snuffles constantly, and jokes about jokes he's not funny at all-at least, at least, when you told the joke inserted laugh-as do the Pindos to understand when you need to laugh...
At Yes) View more :"Oleg Nesterov (Brest) in YouTube".It is such things makes that wah
3. Wipe or as they say to wash the ground cloth P500-P800 for the base coat of paint is well stuck to the plastic (often can not wash, just gently wipe the sandpaper dry, and then blown).
Hmm... )) samawa try not to paint the element to understand why this is done :)
1. Need a good wash detail, and then sandpaper P180 the surface of the wiping layer of paint to the ground.
Would like to see how someone would be to mock at myself and erase clearly to the ground β probably if it before the plastic will RUB, it will be a disaster :)
After drying, wipe first with sandpaper P180, then inspect for small defects and apply finishing putty, and wipe it with sandpaper P220, in order to obtain a perfectly smooth surface.
The Council of the category of "how to make a man suffer" β not easy to take vosmidesyatyh, bring a plane and then if you want to bring down the risk?
4. The bumper primer a single component fast drying primer, and not just those areas that have been sanded and applied filler, but the areas with the old paint.
And what is dvukhkomponentnye not satisfied? :) he has an excellent adhesion to old paint zaminirovanii, it makes sense to take a single component? :)
How to paint a new bumper, where the application of primer on plastic? From 2K acrylic...
"4. The bumper primer a single component fast drying primer, and not just those areas that have been sanded and applied filler, but the areas with the old paint.
5. Samatvam 500 sandpaper PUTTY? after applying two layers."
Can still soil, and the beginner can soil and to spakle to wipe.
I watched a few videos, looked through the forums and painted the bumper the first time .Yes, and from the rough, that there is elektroraspalitel! The main preparation is thorough(it is very long and difficult) to paint is not so difficult!
Watch the first video, I think I did it once, twice and ready. And then remember how I decided to paint the sword on the prior, then in addition to drums I'm more on the machines never painted:))
I saw the work of a\y, but still - the list of works is not complete, far from complete. .
I mean? Separately there is a repair, and painting. The only thing β the price tag for LKM no.
The dealer Council will call if need be, so far, PAH-PAH, it does not exist) And hopefully will remain)
Satanique
It might work on painting without materials, removal/installation and repair? Again, in a Chevy I am painting and repair of the rear bumper came out to about 16K: www.drive2.ru/l/458864136495853626/
And the prices they are more democratic, than the official.
And the link you have - job 2 "color rear bumper"- 7500 RUB - naeb@Lovo.
There is no such work of any one program, to calculate the cost of repair. There should be a list of works:
1. rear bumper - with\y
2. rear bumper - R\s
3. rear bumper - paint
another common work - preparation for painting plastic parts.
LMB should go on a separate line.
What you have written and calculated - it's all from head, apparently not very competent, well at least not having the desired qualifications of the master inspector
It's all work, including materials. Painting new parts! B.have depending on the damage can be more. Call me to find out.
Then accomplish your goal
It might work on painting without materials, removal/installation and repair? Again, in a Chevy I am painting and repair of the rear bumper came out to about 16K: www.drive2.ru/l/458864136495853626/
And the prices they are more democratic, than the official.
call for example, in the world, was recently there - was interested.
for example dealer Nissan
Is the dealer so much, tell me, please. For Chevrolet, in particular, the Chevy+ painting and more 8.
Satanique
The average normal garazhnik in Moscow to paint the bumper costs about 8K, "turnkey" β with the selection of paint and the ability to break the pill and ask to redo it. IMHO, this is not an issue to do yourself without experience.
Except that on some combat pelvis, the appearance of which do not care.
from the official dealer in Moscow painting one new part - 6 thousand rubles. including C\y
to the garage to pay 8 thousand, it's probably just an acquaintance
Satanique
The average normal garazhnik in Moscow to paint the bumper costs about 8K, "turnkey" β with the selection of paint and the ability to break the pill and ask to redo it. IMHO, this is not an issue to do yourself without experience.
Except that on some combat pelvis, the appearance of which do not care.
I agree that you need to engage in the only business that brings you the most money / fun.
But there are a couple but one of which is the presence of these money. Not from good life people platens of the machine repaints...
FOR CHEAP CAR IS ALSO CAN BE YOURSELF! I'VE PAINTED AND NORMS ! Of COURSE the schools were not very noticeable. Of course no one says to paint premium cars in this way!
The average normal garazhnik in Moscow to paint the bumper costs about 8K, "turnkey" β with the selection of paint and the ability to break the pill and ask to redo it. IMHO, this is not an issue to do yourself without experience.
Except that on some combat pelvis, the appearance of which do not care.
Mr. Cho, if I get paint on my coupe, but the mirror will never be.
People, in addition to 1,500 base tank washing, there is a way to put a perfect layer without sharkskin? :)
tomkol
But is it right to paint the bumper without removing it from the car? Paint with edges through time will not be wrapped?
Of course will ETOGES garage style, glitters, okay.
tomkol
But is it right to paint the bumper without removing it from the car? Paint with edges through time will not be wrapped?
Not correct - it is in the middle of not painting
tomkol
Mauger and go for a year or two. But I would have never done that.
before the first winter.
I never say what I WOULD do. Always speak about what have experienced.
Bumper removed, cleaned out all decorative items, Soaps, special putty on plastic was repairing dents and scratches (needless to sandpaper after expiation), mashed fiber washcloth the whole bumper to a matte state, wipe with a degreaser, and only after all of this continuous painting and varnishing.
All this was done for the first time, but first inquiring about the details of the familiar professional pakrascio, which is considered one of the best in the city.
Yes, normally all blown! Of course the repair can not rely on "correct" but it will go
But is it right to paint the bumper without removing it from the car? Paint with edges through time will not be wrapped?
Well then, Yes...I suppose at the very poor painted himself and even with a 40 cm is not clear that it's not a factory...and colors picked up better than the official front bumper painted. There is still a lot rests on time, a very long time when the hand is not Packed, and the tool correct there!
I've painted widehem from YouTube. It turned out very well, the transition is almost imperceptible. Though a little has been poured into the transition solvent. There is a record in the BZ
Very useful infa! If hands grow from approximately the right place, that this description of the work + some on YouTube, you can do better than the professionals!)))) save yourself a article
I'm so sick of these ignorant and dull to you( Before you write something, type in "GOOGLE OK, OK?
What is elektroraspalitel? Seems like a simple copy and paste of best dumisane in the text...
and let's not argue and discuss my post, and then did not write for the Academy and for those who want to try myself to paint!
Maybe someone will be useful, but for me about anything manual...here's the unspoken truth all that is written and all that, and so I think everyone knows... nothing useful...
Terreli
Post about what the eyes fear, the hands do :)
I'm not a painter, but having read the forums and buy a minimum of tools tint rusty wing no worse than some of the "masters".
I summer at my parents painted skirt bumper of cans-very well received...a Self-primer for plastic-polishing-paint-lacquer.
By the way, Yes, I saw firsthand how prepared the bottom after welding in terms of primer + paint cleaner...lay not worse than the gun after the desired proportions. First teasing... but fatco only a violation of the Technicals of the manufacturer in terms of proportions is broken.
You are absolutely right...I haven't written like this Soviet nozzles and vacuum painted my penny)))) so it turned out better Sanchez of the plant it was painted!
Post about what the eyes fear, the hands do :)
I'm not a painter, but having read the forums and buy a minimum of tools tint rusty wing no worse than some of the "masters".
Thank you. Yes, the cleaner, Was the case))) .
This post is not for pros, but for those who want to save money, a lot!)) the quality is certainly not that, but to go with this option it is!
Read about the use of a vacuum cleaner, much shudder:)had the experience of painting your ex a penny using it.The vacuum cleaner died mercilessly, but the paint still managed.As for me-it was pretty okay.Not a fountain certainly, but acceptable:)And on the Nigella bumper painted by brush in black as a temporary solution.Capital do they have the time.Came out pretty good.
Through such articles people are saving you from an arrogant "masters" a Hundred times already repeated, it's not for expensive cars!
The following article pleased with the fact that thanks to their followers, and we will not stay hungry :)) the Part of the article is all nonsense, but overall, the mood lifts:)))
Kurbanrtuhov38
In the first photo the bumper is not mlki case?)
The W163 dorectal
And this "doctor" says, what are they doing with the prices for painting the bumpers? I have the same loudmouth "doctor" charged for the painting of 14 thousand rubles. Shit...I told him a little face is not given, the sons kept. Moreover, the new bumper for the original FF3 has a lower price and not the original from 3,300 to 5th.RUB. These freaks are reading something on the Internet? They need to beat greed!
Look, "doctor!" Here we are talking about painting its not expensive, auto! The person who has the money will not even thoughts to keep, that would be something to paint.It is such "doctors" like YOU! I personally was satisfied with the painting(in the video) And you only would people charge more!
"Painting a new bumper" complete nonsense.
Painting a new bumper: obessmyslivaet-degrease-obespylivajut-primer for plastic(contact-primer) is a database of Polish (or colored acrylic if it is not metallic)
All.
All provided that the bumper is really new. A new bumper is the one that does not require repair.
In the description of the repair of the old bumper, too many wrong moments.
If you know what kind of colored acrylic or Nitra it is possible to mate 180 and paint, if you do not know to clean off is necessary, and it can whip the old paint. now everywhere mediocrity work, complete with it!
I have another bug. Sent me one gobbler Manager named Tom, from the site ΠΠ²ΡΠΎΠΊΡΠ·ΠΎΠ²77.RC bumper not in color. And three times it was changed three times an asshole, he sent me a bumper one and the same color, but not my color scheme, my color AK5C β BRISBANE BROWN, LUNAR SKY-1 sent the same what is a Golden color. Not arguing painted well, but the color! How to get out of this situation by yourself, you need to strip the paint to the plastic? Paint is factory coupled with Ford's. Guys be careful with this site...there are profane and not serious.