ЗаднÑÑ ÑимметриÑ))) — Toyota Corolla, 1.6 л., 2006 года на DRIVE2
I read excerpts from the owners of this car.
Lit up drove into the garage took off the headlight.
And one reflector. He pulled out a red filter from the headlight. For the reflector I decided to put a diode strip.
The reflectors will be additional dimensions.
Reverse combined with tumanka. I remembered that the diode passes current in one direction. The idea is that you turn on the reverse gear and the tumanka and reverse gear light up (the diode passes current); you turn on the tumanka - only the tumanka diode does not start the current. I soldered the diode to the wires. I connected ... The headlights are lit separately))))) Then there were manipulations with the wires with + and - and separately))))) As a result, the tumanka stopped burning at all)))) The fuse burned out ... found it and made sure that it was he, and not the wiring)))) began to check why the lamp still does not light up)))) The answer turned out to be like this - after the diode at the output, the voltage drops and stays somewhere at 3-6 V. pluses and left it that way. I just decided to include the upcoming front tumanki the way the rear one turns on.
Later I will post a photo with headlights, and even later a report on reflectors)
I bought a wire to power the reflectors, I assembled one that week, and I didn’t buy the diode tape on the second one ... I was late in the radio components today) when I assemble the second one, I will actively use the camera)
A pair of diodes - 520r, 20cm of diode tape for each reflector - 120r, wire - 50r.
