Put the panel in order - Toyota Corolla Runx, 1.8 L, 2001

It didn't look bad

Aha! It also shimmers in the light :-)

how will I get the film, if someone helps;) I'll stick it right away))

Yes, not at all))) Glue as you get ready, and show what will come out)))

Lech, thanks!

Technology at the request of "kirill-abakan":

The first step is to disassemble the entire panel completely, remove the buttons, and overlays on the clock display and the stove. They are glued and made of plastic, so you need to peel them off carefully so as not to break.

Having all the parts on hand, we need to estimate how much film we need and take with a margin. You need to take NOT the usual ORACAL, but a special film that stretches well (this copy is sold at us for 2700 rubles per square meter). We need the stretch of the film in order to cover the convex places.

Itself is tight with the help of hands, a hair dryer, a knife and a spatula for grinding vinyl and removing bubbles:
- we mold the film;
- we heat with a hairdryer at a distance of 15-20cm, not always, otherwise the film will simply melt and 'shrink';
- we pull where necessary slowly, not in a hurry so as not to break);
- we roll it with a spatula so that everything is glued.

We collect, glue the pads back, install them in the car and admire them. And then we show us what happened)

generally became super!
Damn, I think another time, if I have a panel under a tree, I would have jittered too, otherwise I don't want to drag it out "psvdo tree"

Duc the film can be removed at any time) and everything will be as it was

I myself recently scratched (while I was putting it to the magnetologist. I almost stuffed my hands)

Well, when the panel is without scratches, it is quite possible)))

Looked good, I wanted to fit it too, dissuaded) The
stock color distinguishes the Torpedo from the total mass of the panel, it looks better than the carbon one) IMHO

I want to try to put white LEDs, otherwise with white backlighting of the legs and a white speedometer, the red ones will not look particularly good, but the green ones are not ice = (By the way, I have exactly the same carbon =) only weaving in the other direction =)

I still haven't tasted Che, how can I change gum from green to red ... even just where to get them?

Damn, I want the same watch in the panel)))) I
'll tighten the current with a sticker bomb)))

Yes, everything is great, but where to get the rubber bands?