Installation of the Kitava winch! - Toyota Land Cruiser, 4.5 L, 1996
So far, the question is about where to place the solenoid block and the connection to the onboard network. My master will have to go through all the electrics and the solenoid block in advance, seal it with cannon fat.
I had to turn the winch itself 180 degrees so that the winding would go from below and thereby reduce the lever and force influence on the "untrustworthy" aluminum power structure of the winch itself ... I just amazed at his (my master's) technical ingenuity!
Winch platform from 8 mm angle
The winch will be covered by a new iron frame for the number
The block was moved to the cisterns
Manual winch unwinding is now activated next to the hood lock
The battery is no longer attached with a string!
Price tag: 15 500 ₽
well, it probably will have to, if nothing like this is lying around in the garage: 0)
Well, most likely I'll place it near the expansion barrel and the washer barrel - there is a lot of space! ... the wires will have to be lengthened ... we will do it, I will report
The block under the hood is of course necessary. But in an easily accessible place.
bad looking) I have a neighbor on a 15-ke straight in the city in the middle of the lobovyk drowned, and you can't find water in the forest)
Yes, it hurts me that water barriers and not to meet in the areola of my movements ... Volga all the same you will not run over! : 0)))
I wanted to say that now you can fearlessly climb into ANY hole, but then I saw that you are still without a shronkel =).).) there is something to strive for;)
passed, very much: 0) ... I went with an empty trunk through the last snowdrifts ... the current winch and saved
there is nothing to compare with in terms of noise ... if you pull yourself up from a snowdrift or from a rut, then it is normal, but when you have to pull a "whole" car out of the sand or down a steep slope, it would be nice to help the block or wheels to help nada (the fuse is triggered from overload)
read the tests, but I'd rather ask you, as a user!) how is quinoa in general? makes a lot of noise when winding? how does it pull such a weight as yours?
yeah she's the one, the price includes delivery of 2 thousand ... I pulled a comrade on a loaded pradik once on a sandy beach ... 5 times hooked up, it also sparkled and smelled, but survived ...
well, when you pull yourself up, stretch yourself out of a rut, it works ... I think the block should be done and fine will be.
To live it will live: I often do not use it, and during the installation they went through everything, tightened it up, missed it, strengthened it: 0)
This is this quinoa for 9000 worth 15 pieces? does it work at all? I don't think it will live long. and for such a weight it is very small.
yes, so far, it does not grow together in any way, so that someone can make a block for me (I don't want to buy for now)
Competent installation, especially since the machine is multi-purpose. ;)
I also had a komap 6000 on Eskudik and I will use this Ketay.
A normal winch, but in general it is better not to forget about such a very useful device that conserves vital resources (battery, winch, frame, nerves, etc.) -BLOCK + EXTENSION.
ZY Some also VARNs burn like sparklers on pagan holidays! ;)
tin I'm shocked with quinoa for 13 thousand. I bought a come-up 9500 for 28 but it's really worth it, reliable, powerful, it didn't spark and stink :)
It will turn out ... if the swan is Chinese, then you need to go through everything, check all the electrical contacts, grease with cannon fat, for example, for sealing; turn the winch so that the winding goes from the bottom, not from the top; it is possible to supply a separate power switch for the winch.
For reference: the winch develops maximum force on the first turn and the force decreases as the number of wound turns increases.
Yes, I also put it on the other day, but I have an iron bumper, a little simpler, and on the bumper there are holes for attaching these guide rollers. That is, they will stand outside the bumper, where the number is now, and the quinoa itself will stand deeper on the bumper guides, which are already bolted to the frame. Somehow it should happen. Will it turn out like this?
Artem, hello! Looked at how they put the winch. Got a question. These guide rollers can be disconnected from the winch itself. Well, for example, if you put an iron bumper to transfer them to the bumper.
Well, you weld an anchor in the form of a plow to the winch and it will be as a strategic tool: o)
I gave up Warn, it's expensive. X s will need it at all or not. The best winch is a friend's car. I'll put Winch 13000 lb.
Yeah, and plow the virgin soil. I already have a second battery, I'll throw it over to it.
Yes, I put this feature "second battery system." She is tied to the work of the generator. When the engine is not working, the main battery is disconnected and the backup battery is connected. Well, there is light, music, DVD, refrigerator during parking. ... Even if it completely sits down - start from the main one. And then it charges. Well this is for drunk drivers.