Removing nameplates - Toyota Land Cruiser Prado, 2.7L, 2007

thanks =)

Thanks for the good advice with the line, otherwise I have an unnecessary nameplate on the car.
for a long time I could not figure out how to remove it)

It looks really better)

I had it on double tape. I rubbed G3 it is strong

I took off the Zhiguli nameplate on the trunk of the trunk and the movil remained (((there was no polish ((it was not rubbed with solvent and gasoline)

the exhaust pipe vibrates at the traffic light =) ------ ANCHORED))))

no, it's not a secret. for all 2.7 the exhaust pipe vibrates at traffic lights =) well, according to the GX VX nameplates, all Arabs also come with chrome mirrors, that 2.7 is 4.0, Europeans are painted, the Arab has a lip, 2.7 often do not have rails. rear hitch like mine. available without towbar

AK-90

yeah, especially who has 2.7, then no one will know now about 2.7 if not an expert on prado = D

And how do Prada experts distinguish 2.7 from 4.0, if not a secret?

and no, the nameplates will sink! And then you go, you look, the back of a Lexus and such a healthy TOYOTA badge!)
Not that at all)

not well, BMW is separate. and I decided to put lights, sills, in the cabin from Lex. I don’t know to like it. I thought that the prado nameplates and so on with the Jix lanterns would not be in the subject, so I took it off right away

Even I didn’t understand what you didn’t understand)
And I didn’t understand what you wrote!): D
Yes, I say that it looks beautiful, but one fig is not a Lexus!) The
same thing as on BMW 328 molded M3 nameplates or on Subu 2.5 Atmo body kit and nameplates STI)

something I didn’t understand and the nameplates and headlights of the GX470 will be out of the question

Tauuer

Yes, I'm sorry, of course. you are a master. but still f * anuto will look.

Yes, no, it looks beautiful, but just "the exterior does not match the interior" ...
It just won't be a luxus or a Toyota)

well yes =)

well, the owner of his car. isn't that so?

uhahaha = D I mean, I'm a master?)

Yes, I'm sorry, of course. you are a master. but still f * anuto will look.

I don’t know that everyone otgaviravayut and I like the optics = (from lehi

yeah =)
and with the backside of Lehi are you serious? what for (

yeah, especially who has 2.7, then no one will know now about 2.7 if not an expert on prado = D

removing the nameplates is always the first step.

Looks better without nameplates

yes, no nameplates are better

I took them off right away, but I painted them in body color.

yyyy yes you probably would not tear off with a turnbuckle and damn you don’t know what to do with the hole = (

yes lan) Sanya, why did you find fault with the nameplates) the attention is already like that) as if they radically change the car) agree if it was instead of GX - VX you would not tear them off xDD) forget on 2.7 who is driving and which car) better take off the hitch ) and chrome-plated kalpak for a spare wheel)

chtoli covers? I will not change the bumper

on disassembly, look at the rear bumpers, or order from the emirates seems to be not so expensive than in TSP

no, I will not change the bumper. Here is a cover to buy or nada to go to the master plastic can they make a cover ?!

it is not so expensive) although look) suddenly you will need a towbar) you look at the yacht and pull the cap)

in short, today I found an option for a cover from LX470 =) you just need to buy a cover

by the way, yes they can, but it's easier to drive it a hundred, they will close it up for you and paint it over it will be solid

yes, but are they different? nada to see. yes, you can also remake it

oO but will he come in? in the same place, the connectors for the towbars are different, although) it does not matter whether it comes in or not, the main thing is to close the hole and then slap Mona)

the bumper and the placement of the equipment under the bottom of the Toyota and Lexus are slightly different, so there may be centimeters not coincidence (

that's for sure =)

well, yes, but again) who does not understand) who knows, he can burn with the rear bumper that this is a Toyota)

aaa not the bumper differs slightly =)

I mean the door that supposedly with a plate under the license plate and rear-view lighting + Lexus lampshades) then in general a pood rear Lexus)

I already have a door without a spare wheel

but if you put a plug and a door) then surely many will think that a Lexus) because most Lexus have plugs and towbars, Toyota has few, and then if they are purely towbars and not bumpers with plugs)

no nafig everything. at first I thought to remove the current GX, but then I decided to remove everything =)

Yes, I did it right! It remains to add the letters VX :)

Yes, everyone is shocked that I'm at 2.7 now, how do you ride it? weak and so on =)

why are you hiding? =) let them guess? =)))

Yes, I will do shaving later and further, I will remove everything that is possible and unnecessary, I will already rip off the plastic in the salon, we will completely redo everything. it will be interesting. I do not like the nameplates on the Prado honestly, and not only because I hide what's under the hood. and so it is really more beautiful.

naked and smooth ass in cars is good =)

yes, right now, I'll put a sports filter and sprint booster so that the box thinks faster

Yes indeed! Let them think INTO 4.0 liters!

but it will fall like 5.5 = D IMHO is better than E240

And I'll hang myself the best E200 soon, let them think INTO 2.0 liters! =) =) =)

On the contrary, I want an inscription like yours)))
we just have a land cruiser in one line written

Ay, I like to cut these tags! The emblem is also Rubani))!