15. His mother is so maslokuller :( part 2 - Toyota Sprinter Trueno, 1.6 l., 1998
Well, actually I traveled a couple of hours with the established beauty and that's enough. It began to leak little by little at the junction of the tube and the spacer with the filter, well, no question, I drove to the garage, pulled it up, until I got back to the house, I looked the flow became stronger. Okay, left the car to do late - night already. The next morning there were urgent travel matters. After the ride - ofigel from the engine compartment. I went straight to the store with spare parts - for a new filter - mine, which is not long to put because of the collector, but to remove the collector and stick in the drain, oh how I didn't want to - well, the sellers who understood found me a shorter filter. Let the car cool down, later put the filter and removed the tubes with spacers until clarification. Firstly, having untwisted the pipes from the spacers - he just got crazy from the state of the gaskets - they just became flattened pancakes,
Yes, and the second question about the diameter of the pipes haunted me - the diameter of the fitting included in the spacer is 11.5 mm, and the hoses I made in the narrowest place are 8.5 - which is already a point - I need to consult with Ukhoplan about the inner diameter of AN fittings and respectively, rubber tubes - if they are thicker, then you will have to assemble according to the same scheme but on its components.
And if you put the pipes on the clamps - will they hold the crush?
In short, so far without a kulnik.
And painting both the block and the tape is a useless thing - maybe because the block was painted from a balloon - you can already see that under the paint of cast iron, the collector tapes are rusting - because the paint gradually burns out, stinks - and loses its color.
And another photo - how the kulnik itself was fixed on the TV - with pieces of a drywall profile for rivets.
about the diameter, remember that the smaller the diameter, the higher the crush. but I also haunted, I generally got a diameter of 11.5mm, 8mm fitting, and 10mm hose. so think che kavo. I’m a psycho, I’ll throw out this Chinese shit, and I’ll buy a normal brand whale with a thermostat.
offtopic. you don't need a gidrach, you don't need nafig? I've traveled for a year, I'm tired. :)
On this occasion, I measured the inner diameter of the hose and fitting 12mm on my not yet delivered oil cooler.
I thought that you and Artyom "Penetron" might need this information.
Yes, there seem to be no gaskets. The connection is simply screwed into the fitting. Well, inside there is something like rubber.