Building a garage show car.part 5 (continued) - Toyota Land Cruiser Prado, 2.7 L, 2000

All the pictures did not fit, so I will continue here :)
In general, we skin, we putty the panel ... Aerosil (crushed glass mat) helped a lot - you mix it with resin and you get a kind of putty, depending on the proportions, you can make a thicker or more liquid - in general, the very fact that we need :))) though she skins very badly ...

Yesterday I decided to connect, check how it plays :))

I connected it from a two-channel boston (about 80W - for 4 shirikas and 80W for 2 meals, in short, very little power) -bliiiinnnnn, it feels like at a concert next to the speaker :))) the pindyr yells :)))) especially the shirikas pleased pressure is felt near them (taking into account the fact that they played from 200Hz) in short, it's funny :) one of these days I will try to power from 4 channels :)
In general, it is not so long before it is brought into a normal state for painting, a tight fit - I still can not decide how and what to cover, paint: (((I'm afraid I won't be able to tighten such a complex shape with a film: (((I think I can try carbon (with 3M 3D carbon film)

The panel will be attached at the top to the standard metal "clips" at the bottom to the metal of the door with M6 bolts

I also impregnated with linseed oil from the inside the left wall of the stealth, tk. it is already ready to be installed in the car, so I put it there, but I forgot to take a picture :(

On Friday I took the cap for casting - it was chrome-chromed quite normal, it looks like a native on the disc :) there will be a separate post about the caps. So far I've
found an old video from the last competition - only 2 subwoofers are playing here :)