salon — logbook Toyota Camry 1989
workplace :)
as you can see, the door trim and seats are from a velor gray interior and the native color is blue — that's how the previous owners punished their darling.
emphasis emphasis . there are seats - in them the side parts can be adjusted in relation to the back part. roughly speaking, a wider and flatter seat or the middle is recessed - a narrow bucket is obtained.
for the driver:
moving the seat horizontally on skids
backrest angle
lumbar support (three positions)
height adjustment of the blue cushion (front (up / down), rear (up / down))
in the passenger seat:
moving the seat horizontally on skids,
the angle of inclination of the backrest
, but in some trim levels, the passenger seat also has a cushion height adjustment
on the door trim velor inserts are removable! those. from the inside they are fastened with bent metal petals
(but in reality I also saw a "poorer" version of the skins - there is a fabric insert fused into the upholstery layer of the door skin)
What's so interesting about your outfit? describe the machine in the blog pliz (as I type)
I have it too! Only the seats and skins are blue, like a torpedo! But the stove control is different, with levers! Where can I find such a block? And will it fit?
in addition to the push-button control unit,
wiring is needed there;
electronic control units for damper servo drives;
other damper rods for damper
servo drives (motors)
It is possible to put such a block, it is right-handed in the city, after an accident, is there any point, and there will be problems ?!
Another such question, have you never seen an on-board computer native to ours?
I was sent such a block like two years ago from a right-hand drive whist in the back of an sv21
(which knows without a rack-mount, it will understand)
so here it is 1v1 like mine, the buttons are convex
there, but there are two more air conditioning control buttons (for the sake of this, I actually bought it)
photo can be find reviewing foti saloon camry/vist sv2. bodies from sales announcements on the website drom.ru auto.ru
but! I somehow dismantled a donor whose climate was controlled by levers - there are all dampers on cables (like on a classic Zhiguli)
and under my panel there are a bunch of motors that move these dampers
and there are a couple of control units (maybe one, but there were no these blocks on the donor )
in general, at the present time, I am slowly trying to figure out what else I need to get in order to shake the condo from the prullka