Inspection — Toyota Corolla, 1.5 liter, 2006

Inspection auto I boldly went to pass myself without any there — 1500r.
And there were several shortcomings that I was told to arrange.
1. adjust the headlights. Since they do not shine according to the standard.
2. The reversing light should be so that the light does not block the state number.
3. Red caps on number bolts. Take.

So, I went home.
On the evening of that day, my father and I began to figure out how to lower the number. In general, plates were cut out of tin, a piece was bent and a number was attached to it. Caps with bolts were replaced with ordinary bolts and nuts.
The next day in the morning I went to adjust the headlights.
And went again to pass those inspection. In general, the guy on those inspections arranged everything.
It remains only to bypass the car by the state inspector. And he didn’t like the one on you that the room practically does not receive light from the standard room lighting paws. And he said it is necessary to fix the number on the backlit grille.
In general, without thinking for a long time, I rushed to the nearest store, bought a grill, twisted the grills according to the number, powered the grill from the standard backlight, plugged the wires into the chip. And everything is fine. I went for an inspection.
On this race all successfully passed inspection signed everything. And he gave the documents after a while I take the documents with the inspection ready URAAAAAAA :).