black optics - Toyota Altezza, 2.0 liter, 2000

here I’m afraid to touch the rear lights, I’ll have to cut them with a dremel :(

It turned out well) But you are lucky, you can’t just tear off the glass from the Germans) Full for the car and for what you yourself did)

thank you very much)
I will buy eyes, the diodes there are exactly the same as in my head optics) they will paint the substrate from white to chrome)

good luck in all endeavors! and will you keep your eyes peeled? Or do it yourself from super bright diodes?

Yeah) Thanks for the advice;)
It's just that such a job is waiting for me soon) the fogs will also be sorted out due to the deplorable state ...
+ I will try to install diode "angel eyes" there)

Well, to cool down, of course, ideally in the oven, it was necessary, but my wife would kill me, eighty or seventy degrees, the fogs were
picked up because of their deplorable state,
and then polished with mashikka and paste with 3000 sandpaper, only there is not glass, it's plastic

Useful entry)
When the tumanki were dismantled, were they put in only boiled water or already in a slightly cooled one?
Did you take the fogs apart after they got wet?
Was the fog glass treated with 3000 sandpaper on top, and then polished?)

Well, if someone helps in hand-made tuning, my report on blackening optics will be very happy!

Thanks! For real advice!

I came up with the water myself, because my wife did not let me go to the oven, and put the soldering iron away!
in the water for about five ten minutes, well, to warm up, the temperature is eighty degrees, some just open with building hair dryers

Lots of useful info here!
altezza-club.ru/forum/index.php?/forum/19/

What can I say… BEAUTIFUL! I, too, will blacken myself in the spring ... Plus, I have a black one, I think it will be good ...
and who gave you advice about hot water? At what temperature do you put it in water and for how long?
I wanted to solder headlights and fogs with a thin soldering iron ...

I came up with the water myself, because my wife did not let me go to the oven, and put the soldering iron away!
in the water for about five ten minutes, well, to warm up, the temperature is eighty degrees, some just open with building hair dryers

yes yes ... I watched this thread ... and just about the water there is no mine ...))

do not worry ! the black ones look great

as I read it in time))) thanks for the detailed description, I plan to do the same in the near future, I was worried about the color, since the car is silver, will black headlights look. Now I see it looks awesome

the main thing is NOT to be afraid and NOT to rush

useful info. I'll take note. thanks!

Yes! maybe even better :) I imagined the lenses and washed everything inside from dirt, and the part that is painted does not affect the light in any way ... maybe only as a hood, the reflector itself and the lens inside are deeper there

Are the fog lights the same as before?

I will have two stage lenses, I don’t know the truth from which car

on the 10th lance, we dismantled the headlights ... we also filmed with the help of a building hair dryer ... we also screwed the lenses there))

I don’t argue)) they just brought us for free))

yes, not in the fogs are too small, I'm looking for large lenses like from Toareg

we put helo with fogs))

:) let Freud thank you for correcting me, but I won’t correct it, I liked it!
yes, laziness just slows me down sometimes, but I fight it

quote "... 3) we disassemble, here it’s important not to rush so as not to break anything, put
the lantern in hot water, after 5 blowjobs we pull out and pull out the glass, while the glue softens and becomes very elastic ..."

everything according to Freud, do not subtract, do not add)
ps. great job, I will add - the main thing is not to be lazy.