Shumka, music, other - Toyota Caldina, 1.8 L, 2004

1. made vibration isolation of the front doors with materials vibroplast m1 and splen10 ( www.stplus.ru ).
I made the inner part of the door with a splen, and the outer part with vibroplast. on the former kalda I did everywhere and spleen and vibroplast. schA became lazy.
it took 2 doors - 2 vibroplast sheets, splan sheet.
I inserted tweets (mistery :), they come with crossovers, without them it is not desirable) into the case that comes with the kit, I drilled only 2 holes. fit almost perfectly, are located opposite the decorative mesh.
the sound has become more juicy, and of course there are high frequencies, now I am satisfied with the sound, play normal, if the quality of the track is normal. the door now does not speak on a bad road))
it is desirable to change the speakers too)))

2. I painted the calipers in a glamorous color)) I
just washed the calipers properly, rubbed them with white spirit, glued all the places with tape and paper (and the block too)))), 3 times from the spray (paint for discs, not thermo, let's see how that's enough, yet the support is not heated as a kick-ass)

3. weight distributor supplied)

4. Supplied mesh in the bumper hole, replaced the lamps in the fogs on the PIAA, the color is the same as the standard xenon. Also for replacement dimensions, supplied by ShoMe, but the color is more blue than white. It is also advisable to change the lamps in the reversing lights because they shine very dimly.