tinting — Toyota Land Cruiser Prado, 3.0 liter, 2010
in general, I passed the inspection yesterday)) I decided to go through it myself)) since the car was new, I thought that I would pass without problems) I arrived at the maintenance, stood in line for 1.5 hours, drove in, paid the receipt first for 300 rubles, then 250 rubles for the instrumental)) funny things began) ) 1st front brakes slow down incorrectly))) it was told to me by the TO staff and I don’t pass by the standards! this is on a NEW CAR! I also have blue dimensions!)) and got to the standard xenon)) I proved to them that the dimensions are moon-white and not blue) and regular xenon!))) plus there is no first-aid kit and a fire extinguisher!)) in general I had 3 cars and he never passed!)) spat on everything, called a friend and went through everything in 15 minutes))) and it turned out that everything was fine with me with brakes)))) in general, morality! what for, you still have to go through maintenance yourself. let it be on a new car))))
why am I talking about tinting then? I want to install a removable tint on the front. since I ride a lot in other areas and I don’t want to waste time with gays, I think to install such a stray.
Issue price: 0 ₽ Mileage: 7,000 km
We had a case in Tver. A new Kruzak 200 arrives at the station for maintenance, drives it. He - the alignment of the brakes or some kind of rubbish there does not go shorter than your car MOT. Uncle says ok. Write a piece of paper that did not pass, he was given everything as it should be. He takes these papers, goes to the salon in Moscow, throws the keys to the Kruzak and says to take the car. Everyone is in shock, like what happened. And he - what bolt did you sell me a defective car for? even the brakes don’t pass according to the norms))))) 7 lawyers from the car dealership and it seems like a representative of toyota arrived and had this station for several days)))) since then it’s not a problem to pass MOT on new cars in Tver))))
Normal))) By the way ... so that the shooting does not mirror, wipe the glass first, and then, as you set the shooting, pour anti-freeze between them (well, or ordinary water) .and remove the liquid with a spatula (or like me with a credit card))))) Air between the glass and there will be no shooting, and there will be no mirroring either. I do it myself))