Radiator replacement — logbook Toyota Altezza 2002
I decided to change the radiator, since the machine was very hot, and the native radiator is 10mm wide, which, in principle, is enough for a drain, but everything is different for me ...)))
I took a radiator from Celica st205 M / T, 52mm thick. I had to cut off all the fasteners, and fit them under the native turntables.
The place where the lower pipe is put on (into the radiator). It was on the other side. I had to cut, weld a hole, and weld on the other side.
Costs 7000 radiator
Welding 1000
PS Thanks for the radiator Valera aka Badboy
Issue price: 8 000 ₽Of course, contact. The guys in the club take from is300, it seems there are fewer problems, but it seems to be a bit thinner. Contact in short, I will help if anything)
I need it too, without it I can’t plus in buckets and take it off, then everything sweats, but without it it’s generally opa, if you help with advice, where did you cook, etc.
The fans are stock, of course it is better to put high-speed (small), but this is enough for me for now. Well, you decide whether you need a Conder or not, I need it)