How do you like this casting? - Toyota Corolla Levin, 1.6 L, 1998
Looked at a pretty 17-inch casting. Here I am suffering worth it or not. The dynamics will naturally fall, but on the other hand, I'm not a racer) But visually, the machine will go. And will not it touch the arches, although it seems that it should stand up according to all factory parameters. eh, I'm all in agony, doubts.
see for yourself: wheels of 17 radius, respectively, tires of 50 or a maximum of 55, and if the roads in Novosibirsk are all in the pits, then you will get bored with a tire changer. We have one clever man put 17 rollers on a VAZ 2104 and the conclusion: it drives no more than 50, speed bumps pass in two minutes, and if it gags and gets into a hole with a wheel, then a direct road to a tire changer ... so decide ... for Levin, I think the most optimal wheels 16 radius.
yes! I already agree 45 height, but it is better to set the radius that way 15 "or 16", otherwise the scribe drives! or current to the garage or at exhibitions!)
>> respectively 50 tires or a maximum of 55
nifiga, 45 maximum height) are you, the 50th will probably shrug!
I was on Integra. But damn it once decided to restore the appearance - gave it to polymer painting. In general, heating up to 200 or 300 degrees greatly softened the discs - they began to crumple even on small bumps and quickly sagged: (Do not give forging to polymer.
Damn =) and I'm like that - as a keepsake ... then I got hurt. On our runx alone there were such
aka-mazai
3.9 is too much =))) will grind about 100 meters!
Normal forging 7-8 kilograms
Normal 15s forging weigh 4.2 kg. This is Volk Rays TE-37 :)
A rare series of RAYS Arthur Exchange / I saw the same file on the BBS - one to one))) and white, so when I saw them on sale I tried very hard to buy them, it's a pity to change them to others
Come to my blog =) which are on me now ... they suit me. If they survived the summer on profile 40
Yes! 1zzfe on manual transmission =) I have a 14 radius family shamelessly polished ... I already found my disks =) and nice and strong and not very heavy. Now I look after rubber for the winter
wait, did I understand correctly that you have 1zz-fe? If so, the Desmonds will be fine for you. and weight 3.9 is for radius 15 ... (weight of the disc only!)
slideragp
PU on vatomat will not grind ... 3.9 is normal for excellent magnesium forging, and 7-8 is something that is not even VSMPO!
VSMPO 6-8kg - passed in the School = :)
Well, you give =) cool sports races weigh about 5 kg ... I know that there are about 4 ... so put them on mine, I will be in the third place =) on your vegetable ... in everything you need to know when to stop!
Disk is half the battle! More rubber of different weight categories!
About 90 percent of cars have a weight of one wheel more than 15kg ... And there are "racers" that drive 25kg =) and do not break off
PU on vatomat will not grind ... 3.9 is normal for excellent magnesium forging, and 7-8 is something that is not even VSMPO!
put Desmonds on 15 3.9kg weight! on 17 also half-chrome kapets severity! you will barely barely go, the only way they will roll you to the pelvis! IMHO