INTER-BLOCK OF PERSONAL PRODUCTION — Toyota Corolla, 1.5 liter, 2003
After installing the DLS R6A, two things immediately became clear:
1. It is necessary to additionally roll the front doors with vibroplast.
2. My old interconnect cable is complete crap!
Without delay, it was done - three more sheets of vibra easily lay in the front two doors, rolled up splenitis 4 on top (there used to be barrier 4, according to my feelings splenitis is more effective), since all the material was at home in stock).
Advice to everyone who is thinking about noise and vibration isolation - it’s better not to shag your grandmother and immediately make doors for the future - it’s better to overdo it than not to do it)))
The following weekend was purchased:
— microphone cable 10m;
- 8 BELSIS connectors;
— 5m corrugations
An important point when choosing a cable is the screen, which should preferably be made of woven copper. The most rubbish is aluminum foil, which can be seen in the lines of the low price segment.
I was pleasantly surprised by the result! The sound became more realistic and transparent, the vocals became alive…
I want to say a huge thank you to Tyomych (TEMA-TEMA) for the important information and for saving an extra $ 100 in my pocket, at least for buying good interblocks in the store ...
Further, the whole process of twisting, soldering and laying in the corrugation.
I apologize for the quality of the photo.
Issue price: 800 ₽
four bells are inserted into one VCL?
why I ask, I have a single-channel, it has two red two white inputs (outputs (I don’t know)) connected by two bells and everything works. why four bells? two amps?
:) Not much thinner than yours - look at the ratio of wire diameter and connector diameter)))
I took it back in the summer ... It was mine and a little more expensive, maybe Canare, I didn’t specify.
CAHEK-rus
Yes, I took it in Armavir. Shop "SPUTNIK" on Mira street opposite the bus station
And I know where it is. There is no Japanese Canare?
They sell wires for every taste and color, they are basically identical to microphone ones, the only difference is that they will be thicker.
I don’t know, I don’t know ... Maybe it’s from the bass guitar, and mine from the solo?))))) But be that as it may, the sound of the guitar player is very lively ...
Yes, I took it in Armavir. Shop "SPUTNIK" on Mira street opposite the bus station
Ask canare L2t2s - the best option. The thickness is not as important as the screen (the signal cable is thick and not needed)
Here, too, I think to solder myself, tell me please, so which wire should I ask in the store? and such a retreat in the interblocks rolls the thicker the cable the better. Or is it still the better the shielding the better for the sound?
The better the shielding, the less interference and the fiber will receive a signal when passing from the GU to the amplifier, the shorter the interblocks, the better!
also interested in this question. What should you pay attention to when buying a cable?