Number fixing improvements. — Toyota Corolla, 1.6 liter, 2010
I was not satisfied with the way the number was attached, I decided to do it humanly. I ordered a stand for the number from the Chevrolet Spaghetti, as it came, I installed it.
Installed as follows:
1. removed the number from the frame;
2. Aligned the stand for the number in the center, pulled out metal clips from it and attached it to the bumper with 2 self-tapping screws along the edges, and with 2 bolts to the ebb for attaching the number to the bumper. Having previously drilled holes in the stand to the required diameter and drilled a bumper flashing for the number plate in two places;
3. attached the frame to 3 screws;
4. then put the number.
Now the number is held securely and the whole design looks harmonious.
Thanks to. But why don't they do it at the factory right away? The price would hardly be affected.
and here they offered me such a stand from the hover - so the Chinese hc make them shorter than the usual number, and higher than the usual number ... hc))))
from lachi will also need to be bought
I don’t like my own. The number sticks out on the sides ... thanks for the info ...