A sudden photo shoot when installing a spacer under the sensors ... - Toyota Soarer, 2.5 liter, 1994
Why a photo session? Why sudden?
Yes, because suddenly there was time, suddenly he took Vovan (Redworm), suddenly we went to install a spacer under the oil filter under the pressure and oil rate sensors, and suddenly Vovan took a photo tag))))
As a result, what has been done:
— Replacing the tuned hood with a stock one in the winter season (for what? Firstly, to keep warm, because the stock one is made of thick iron, with good thermal fabric and, of course, without nostrils through which the heat flew away) ); secondly, to increase the weight of the muzzle, because. the stock is much heavier)
— photo session
— the oil in the engine was changed (Mobil1)
— the oil filter was changed — the Greddy
spacer was installed under the oil filter — the
pressure sensors and the rate of oil were screwed in and the wires from them
were partially stretched — the oil in the gearbox was changed (BP 7v90 mine)
— the bottom of the crop was bent - with a special winder (bri horizontal movement was touched by the bifurcation of the exhaust)
- but the new original hose from the reservoir to the hydraulic motor was changed
— Changed to a new original crankcase gas hose from turbo to capacity.
Well, that's all for sale, respect to Vovan for the photo;)
Issue price: 6 500 ₽ Mileage: 145.000 kmWhy are you so difficult Max)) If you don’t have it doesn’t mean that everyone doesn’t))))
Vovan has already seen it, I’ll smear you and poke your nose with it;)
All day long with two pushes ... You’re in the bubble)) And hare flood 8)