need advice on racks — logbook Toyota Corolla Runx 2003

NO! It didn't work =(((

Didn't you go with Sergei?

It’s just that I don’t have rear struts, and therefore softly and to the very bottom, I didn’t twist them =)))
That’s why it’s soft.
During the winter I'll find something and put it in the spring, we'll see.
Yes, and I have nothing to compare with. I didn't go to others.

if 6 then how can you be soft?! That means the springs have sagged! =)

I did not guess =))) I
found it in the auction.
Characteristics
usually … F / R 6.0kgf/mm / 4.0kgf/mm
freedom … F / R 180mm / 200mm
inner diameter F / R 65 … / 65 …
machine height adjustment … -60mm--45mm / width F / R -50mm- -25mm

Well, I think if soft then kg2

but there is nothing there =(((
I'll go and look again

evgen-runx

Yes, they are soft =)))
I've read somewhere that they installed from the brand from the steering column.

On the spring should be written how many kg-how many?

seriously soft?
but they have a collapse

Yes, they are soft =)))
I've read somewhere that they installed from the brand from the steering column.

I picked up from foreign cars, well, they are most likely Russian but like foreign cars.
PS: these would be on my ring =) )

I didn't screw them all the way down. Yes, and there are no rear ones u003d ((( it seemed that they were soft. Or maybe I just got used to it already =))))
In the spring, I will put something on the very bottom and in the ass, you will see it will be seen =)))
In general, they are cool. At least in corners, it's cool to bypass all sorts of marks on the outer radius. =)))

yes, by them. twist as you want =)))
Stock they are not absolutely.

Is the stiffness adjustable with rings? And the usual (stock) anther will not fit?

Yeah about them

you mean from the stock racks?

M... clear!

Stop downvoting already! OR WRITE FOR WHAT

I won't tell you anything... haven't done anything yet...

The time will come and you will do something =)))

I haven't seen your secrets, I can't tell if they are the same or not.

Everything is clear, in short, like my Secrets)

there is no stand itself. only due to the spring lower higher

The stand itself is not adjustable in rigidity?

Medium hardness =)))
There are adjustments =)))
Only the key needs to be selected

pads are soft? Is there a hardness adjustment?

in a personal example =)))

You need to find the rear ones by the summer ... The back
floats and the front stands steadily ...
100% that you don’t get the whole buzz ...
I won’t give an example, otherwise the admins will ban ...

Thanks for the advice =)))
Yes, the rear ones are not enough = (((
Already looking for rear racks =)))

Definitely good stands! The rear ones would be in their kit ... you shouldn’t take a steam bath on the anther, there is also a torn one, you remove it and pick it up in the store (painful for the seller)

All sell do not worry =)))
It is necessary to communicate with people and do the BZ. I combine business with pleasure =)))

well, they divorced =) what's so complicated here ... anthers do not sell ?!

how lucky
Average about 15,000

Che price tag for these risers?

Tell me, are TEIN being repaired?

they don’t get much on the units themselves = (((
mostly from the rear sight of the kurenevs =)) do they fit
your CCC suspension or is it simple?

Are there such things on Edeshka?

Xs it is)

without forging you snatched a freebie =D

and only 100r per piece, I just smiled =D

Well then. yes =))

They are plastic, eternal bitch! =)

Boomer is cool =))

I recently ordered myself from Boomer)