Wheel and disk sizes - Toyota Celica, 1.8 liter, 2000

I want 17, 18 - this is too much with our roads ... I will put 225 * 45 * 17 by the summer

225-40 x17, you will climb on your belly and cling to everything.
at 17, a 45 profile goes to the mudflow, otherwise there will be a lot of space in the arches, which is not beautiful

Comment has been deleted

Aaaa, that's how it is :) well, thanks again :)
I'll take myself 225*40*17 most likely :)

40 goes to 18, I had it like this

The more ET, the deeper the disc goes inward. In general, the opposite is true =)

I now have stock 15 — departure 38, somehow they are sitting inside ... :(

the best departure for the Selick in the 23rd body, ET35, try to stick to it. Otherwise, the wheel will either be inward or protrude, which will cause dirt to fly

Aaaaaaaaaa

well, the comfort zone is not very demanding for me :)
as soon as I take the disks, I will look to set what will fit and how it will look — in general, I want 235 rear and 225 front

According to the user manual for the seeder, your tires are 215/45, otherwise the wheels will look small in the arches, which is not nice for the PPC. Yes, and you will have more comfort, because at 17 it does not remain at all.

Well, I'm going to put 7 x 17" 5*100 d54 ET35 215/40 R17

It all depends on the width of the disk! There is no one right ET!

I'll tell you more, I personally pulled it to 7.5j 185 width) no problem. guys pull and 165 but there already have to blow up :)

on 7.5 235 it was not problematic to pull ...

for 225 width you need a 7.5 disk, and for 235 - 8.
How are you going to stretch the tire for 7 width 235?)