Installing spacers under the front. — Toyota Ipsum, 2.0 liter, 1999
We remove the racks and disassemble.
Making a site template
We knock out the old studs and weld the bolts longer.
From thick rubber, I cut spacers.
Before rose 4 cm
+ Became taller! And this is a very big plus.
- Now you have to slow down when cornering. .
Rubber — in the garage found a piece of conveyor belt — very hard. The last time I made a friend from a sheet piece of ebanite. The best of aluminum. I had aluminum on the carib - super.
Bolts 100% weld - 2nd variant look for the same stud only longer
On the back I ordered here grigory-auto.ru/internet-...der_id=997102&mode=folder
I thought of doing the same myself, there are a couple of questions:
-What kind of rubber? Soft or hard?
Is it necessary to weld new bolts?
Yesterday at the car market I found a set of plastic, the price is 600 rubles. studs are included. Unfortunately, there are no aluminum ones on ipsum ... I thought, on the contrary, that it would be better to make rubber than hard ones ... I will look for aluminum or do it myself, something does not inspire confidence from plastic. P.S. thanks for the advice